|
| chooka |
|
||
|
Job finally done!Balanced & blueprinted 302W with 30 thou oversize pistons,ARP bolts throughout,GT 40P heads flowwing 405hp at 550 thou lift,polished cobra intake manifold port matched & flowwed,crane cam part no 449601,yella terra roller rockers (platnum series adjustable),70mm t/b 75mm maf,port matched genie extractors,2500 stall,1/2 inch phenolic spacer,mallory fuel pressure reg, 255gph walbro fuel pump,irridium plugs,24lb injectors.
Car up and running after a few teething problems.Running it in over the next few weeks,then getting it dyno tuned.
_________________ ----------------------------------------------------
|
||
| Top | |
||
| Timmeh |
|
||
|
Cant wait for the dyno read out. Should be a good rwkw score.
Sounds like a great engine you got there. |
||
| Top | |
||
| Waggin |
|
|||
|
Wow, sounds like a monster. Thats the combo I was going with, so I'm very interested to see what the outcome is.
They're my old GT40-P heads too.. before I decided 347 and AFR185's was more fun 
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Sounds like a real strong combo. Look forward to hearing results.
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| chooka |
|
||
|
Drove it home last night,still running a bit rough down low & couldnt get it past 3 grand without it lighting up the rears.But ill be onest (it was rainning)
_________________ ----------------------------------------------------
|
||
| Top | |
||
| Vic |
|
|||
|
That combo is so similar to what I am doing... the only difference is the cam you have selected and your TB. I would be interested to see what your eventual dyno graph shows.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| chooka |
|
||
|
What cam you using vic
_________________ ----------------------------------------------------
|
||
| Top | |
||
| Vic |
|
|||
|
Am seriously considering the Crane 2030. The TB is a 65mm.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| xr8ute |
|
||
|
Looks like it will be a pretty tough combo. Thats a reasonable sized cam as well
Can't wait to here how it goes after its fully run in and tuned. Which valvesprings/retainers/locks did you use? What sort of car is it going in? Good luck with it. |
||
| Top | |
||
| chooka |
|
||
|
Motor is in a 95 EF XR8,valve springs and retainers were done by the rebuilder and I havent got the exact specs,I know they are hd double springs and have been shimmed to the correct specs.
_________________ ----------------------------------------------------
|
||
| Top | |
||
| chooka |
|
||
|
Been running it in today & having a bit of trouble with restarting after driving.When I turn it off then hit the ignition it wont start without using the throttle and when it does it is running a bit rich.Help needed.
_________________ ----------------------------------------------------
|
||
| Top | |
||
| Waggin |
|
||||||||||
|
Here are the pics
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
||||||||||
| Top | |
||||||||||
| eng-fnm |
|
||
|
Nice....Do I even ask how much that setup is worth now ??
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
Try clocking the maf to 9 o'clock ???
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Waggin |
|
|||
|
{USERNAME} wrote: Try clocking the maf to 9 o'clock ???
Out of curiousity - why?
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 19 guests |
