yep got a timing light.

the harmonic balancer is brand new. the whole motor is new.

i have been told to run cam in by keeping revs at 2500 rpm for 20 -25 min

i rang a1 hi performance and Leon reckons the dizzy is out 1 tooth..

just dropped the carby back to Chris mills as its leaking badly too.
bloody brand new too..

will wait till i get carby back on car and try moving dizzy 1 tooth. pretty sure i will have to move it 1 tooth anti clockwise.

dizzy / 1 tooth is not going to make any difference, because the ice dizzy has a fixed trigger angle and no advance mechanism.

You may need to verify TDC on the balancer is TDC on #1 cyl with a positive stop device or a screwdriver to get an approximation. Have seen new balancers being out by some degrees.

If you get stuck i can come out and have a look for you.

yep got a timing light.

the harmonic balancer is brand new. the whole motor is new.

i have been told to run cam in by keeping revs at 2500 rpm for 20 -25 min

i rang a1 hi performance and Leon reckons the dizzy is out 1 tooth..

just dropped the carby back to Chris mills as its leaking badly too.
bloody brand new too..

will wait till i get carby back on car and try moving dizzy 1 tooth. pretty sure i will have to move it 1 tooth anti clockwise.