|
| pickdrift |
|
||
|
Hi Guys,
Pete, (XR9UTE) if your still on this forum would love your input! I Currently have an EBII XR8 Falcon with Injected 5.0L, I Am looking for more power to drift, Car has been completely Gutted all that remains is the engine and t5. We are wondering if we can simply put a 351 crank into the engine, and if so, what cam and heads would be ideal? Or any other input is appreciated. Regards, Pickdrift |
||
| Top | |
||
| fairlane6970 |
|
|||
|
sorry it won't fit.
 thats why they have different blocks for each. See Terroristghia's build thread on fitting a 351W if you like viewtopic.php?f=53&t=65071
_________________
|
|||
| Top | |
|||
| pickdrift |
|
||
|
I Was under the impression that the blocks were the same? we have also swapped an older 302 and 351 crank heads etc with no troubles..... if not, whats a cheap easy way to inc HP on the 5.0l or even change engine to a carburetor 351? the car will not need to be Engineered or registered or anything...
|
||
| Top | |
||
| fairlane6970 |
|
|||
|
Clevelands are the same block but not Windsors I'm afraid. most people seem to think there is no cheap way to get big HP from these later Windsors, so a 351W with carby might be the go to keep the dollars down a bit.
_________________
|
|||
| Top | |
|||
| pickdrift |
|
||
|
fairlane6970, Thanks heaps for the help.
So from the sounds of it we need a complete 351W carby motor? T5 still bolt on ok? It seems alot like it would be easier to run a larger injected motor? Cheers... |
||
| Top | |
||
| EBXR8380 |
|
|||
|
You can get EFI inlet for 351.. With 24/ 32Lb injectors, 70+mm maf [Lightning maf and injectors ?] and all the 5.0 EFI fits...
The hoses on 5.0 fuel rails require extending longer but that's not hard to do.. The 351W crank has massive 3" mains...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Do what EBXR says. and look at the 351w into XE thread above which has a lot of clues for this.
Cheers. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
