Fordmods Logo

351 windsor outta an f-truck 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: 351 windsor outta an f-truck
Posted: Sat Dec 11, 2004 4:12 pm 
Parts Gopher
Offline

Age: 39

Posts: 92

Joined: 8th Nov 2004

Ride: ed futura

Location: perth
WA, Australia

ok so.....
i know not much on the f-trucks and their 351 engine. so what diff is there to the 302 windsor

 

_________________

www.thepurplecircle.com
original member.

Top
 Profile  
 
 
Posted: Sat Dec 11, 2004 5:30 pm 
Getting Side Ways
Offline

Age: 43

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

taller deck height=wider block, and the lower half of the inlet manifold is different to a 302, the firing order is different as well.....

 

_________________

Banned

Top
 Profile  
 
 
Posted: Sun Dec 12, 2004 12:01 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

The fireing order is the same as roller efi engines.The earlier 302's are different Roller efi is 1-3-7-2-6-5-4-8....
The 5.8 had speed density eec computor and ran NO maf, BUt all efi 5 Ltr loom fits...Sump is different to 5 Ltr, bigger rear main...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 2:21 am 
Parts Gopher
Offline

Age: 39

Posts: 92

Joined: 8th Nov 2004

Ride: ed futura

Location: perth
WA, Australia

so externaly there the same dimentions?

 

_________________

www.thepurplecircle.com
original member.

Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 12:02 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

As said above higher deck height as in bores longer...
Being longer and at 90* It will be wider....
The height will be a slight porblem if fitting in E series?But bonnet cowling cn cure that....
DIMENSION DES MOTEURS

Moteur Longeur Hauteur Largeur
302 27-1/2> 20-3/4> 18-3/4
351W 27-1/2> 23-3/4> 21
4.6L SOHC 28> 26 >28-5/8
4.6L DOHC 28 >29-7/8> 30

As you can see the 351 is 3" higher and 2 1/4" wider...Sorry for French lesson off Canadian site...Note the 4.6 is wider than 351...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Last edited by EBXR8380 on Mon Dec 13, 2004 7:01 pm, edited 1 time in total.

Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 12:20 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

ahh.. wee wee monsuir hor hor eky thump

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 1:16 pm 
Parts Gopher
Offline

Age: 39

Posts: 92

Joined: 8th Nov 2004

Ride: ed futura

Location: perth
WA, Australia

ummmm. right,. ill keep reading that 4 a bit and ill try make sence outta it. thanks anyways chaps.

 

_________________

www.thepurplecircle.com
original member.

Top
 Profile  
 
 
Posted: Sun Jan 01, 2006 10:47 pm 
Getting Side Ways
Offline

Age: 41

Posts: 756

Joined: 21st Nov 2005

Gallery: 25 images

Ride: 1999 AU futura

Location: griffith
NSW, Australia

There is a bloke in Street Fords issue 02 who has put a 351 into his EDXR8,the motor was out of a 1994 SVT lightining truck.He got the engine through Eagle Imports.Also in the article says the 351 uses alll the standard 302 running gear-brackets,timing cover,water pump and pulleys,one don side was that he had to change the belt for a longer one.

It also said that the standard XR8 computer was enough to fire the engine.

One other down side was the 1inch taller deck height,which was rubbing on the bonnet.So possibly if you wereto fit one you would need a bonnet made up or a bonnet scoop.Ths guy fitted a bonnet scoop from a turbo diesel nissan 4wd.

Hope this helps...

 

_________________

COMING SOON,XD WITH A TURBO...CLEVO STYLE

Top
 Profile  
 
 
Posted: Sun Jan 01, 2006 10:50 pm 
Getting Side Ways
Offline

Age: 43

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

jesus H christ..... talk about thread mining!

 

_________________

Banned

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 11:50 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names