|
| mrghia |
|
|||
|
need some help I went to start my car the other day and it sounded like it had dropped 2 cylinders so i replaced the leads, rotor button, dizzy cap and plugs but made no difference, is not injectors coz its running rough on gas and petrol. Its got a real bad viberation any ideas?
|
|||
| Top | |
|||
| Macca |
|
|||
|
Did any of the plugs have a totally different colour, rust, oil etc on it?
Next I would try a compression test, then get back to us, as it sounds like you have ruled out ignition or fuel system. You could have something as simple as a bent push rod so don't panic yet.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| prydey |
|
|||
|
make sure the oil isn't ice coffee. mind you, having just put gtp's on mine, removing and replacing heads is not a major task once you know how. 1st time was a learning experience but if i had to do it again it would be much quicker.
if it is a gasket, graphite ones set me back $45 and crack test is about $40 as well for both. no need for panic just yet though.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| mrghia |
|
|||
|
some of the spark plugs were white i think cylinder 4 and 2. Not to worried if its easy to fix will fix and not fuss over the motor or it means that i can do some wotor work like cam and heads without the missus b***hin lol
|
|||
| Top | |
|||
| prydey |
|
|||
|
if you are looking at doing heads, i cam accross these on ebay. sorry to anyone who is watching this item but it won't come up if you just search for gt40p's if that is what you search for.
he claims they are au2 which makes them gtp's. obviously you would want to confirm that first and i would try not to draw attention to the gtp markings as when i was looking, there were quite a few wreckers who were not aware gtp's were on all au's and not just xr's. http://cgi.ebay.com.au/FORD-FALCON-LATE ... dZViewItem
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| mrghia |
|
|||
|
whats the difference between the gtp's and the standard heads?
|
|||
| Top | |
|||
| prydey |
|
|||
|
they have a slightly bigger intake valve and apparently are much better flowing. some minor port work can really improve them again, esp on the exhaust side. to get the maximum benefit from the heads you really need the explorer upper and lower intake as well as the ho manifold simply does not supply enough air.
with mine i made an extra 4.4rwkw at peak and up to 7kw at other areas in the power curve, over the e7's i took off although the e7's i had on were ported and may even have been faced. i'm still running ho manifold though which is holding back the full potential.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| mrghia |
|
|||
|
ok then thanks for that. well i'll be looking for gtp heads then
|
|||
| Top | |
|||
| schnoods |
|
|||
|
Yella Terra are doing em New for $640 plus gst, another option there.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| paulhowes |
|
|||
|
Sounds like a broken valve spring dude (reasonably common). They do exactly that and the coil pack drops two cylinders the one with the problem and the one diagnally opposite on the coil pack.
of course I could be wrong and i hope I am but they are cheap to buy and easy to replace |
|||
| Top | |
|||
| mrghia |
|
|||
|
i'll look in to that thanks
|
|||
| Top | |
|||
| mrghia |
|
|||
|
where do i get the info on the yella terra heads? and how would they compare to the gtp's?
|
|||
| Top | |
|||
| ovo616 |
|
|||
|
they are gt40p's
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
http://www.fordforums.com.au/showthread.php?t=94196
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| mrghia |
|
|||
|
ok then thanks
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 30 guests |
)
