|
| falcon gl |
|
||
|
hi people my eb has been going into limp mode and i cant seem to figure it out.
it used to do it with my old auto and at the start of the year i fit another auto and now its doing it again so i pulled the pan off the auto and the oil was clean so i just changed the filter while i was there, has anyone had any problems like this |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Check the connections from the loom to the box. Mine did this due to the connections being loose.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| falcon gl |
|
||
|
what a champ i never would of thought that thw plugs could be the problem, because when i punch it thats when it goes to limp mode so the movement of the engine is what causes it gotta take a look tomorrow thanks
also was it easy fitting the au coils what was needed |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
After market ECU. or you could get all the bits from an AU 5.0 and fit them that way
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
