|
| 409Stroker |
|
||
|
Hey trying to locate the engine number on 351 windsor cant find it any where, the motor is still in a 69 Mustang so it is difficalt to look but it apears not to have any number .......exactly where should i be looking and is it possible some blocks arnt stamped...????....
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| BuNtEr |
|
||
|
try looking at the rear of the motor on the left side just behind the last sparkplug use a bright light and you may have to remove the last lead to see it
_________________ BANNED |
||
| Top | |
||
| XR9UTE |
|
||
|
U.S vehicles don't generally have engine numbers.
Are you trying to accertain if it's the original engine? That's trouble with M-code stangs, they could be either 351W or 351C. Look at the engineering number on the block. It should be a C9.. . If it's D0.. or later it's got a later engine in there. What's the VIN say behind the windscreen? |
||
| Top | |
||
| AXR88U |
|
|||
|
Try on the block at the rear of the valley cover
_________________ ________________________________________
|
|||
| Top | |
|||
| 409Stroker |
|
||
|
its not my car its a good friends ill have a look at where you guys said over the weekend and ill get back to you to let you no how we went in finding it... thanx for the imput guys........(we no its not the original engine due to the casting numbers but we are trying to find the engine number so it can be rego'ed.......)
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| cjh |
|
|||
|
Another spot to look at is on the machine spot face on the lower lefthand crankcase. The number might only have about 5 digits.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Stamp it ...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Macca |
|
|||
|
{USERNAME} wrote: Stamp it ...
I was thinking the same thing 
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| ozrunner |
|
||
|
If the engine came with the car from the US then it will be as XR9UTE has already said.
US engines don't have engine numbers stamped like ours are. |
||
| Top | |
||
| cjh |
|
|||
|
The engine numbers are stamped in the same place as the V6 engines in the Explorers, the left hand rear lower crankcase.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| 409Stroker |
|
||
|
ok had a bloody good look for this number and it just isnt on there, there is casting number and we have found out that its an engine from the previous yr before so no engine numbers to be found....thanx for the help guys...
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 29 guests |
)