|
| Lay3d_low |
|
|||
|
just went to few exhaust places, carline said cant get dual exhaust on a el v8, yet another shop said yeh it can be done.
im waondering if any one has got one and if you cost post up a few photos or info for me please  Thanks Guys Locky.
_________________ Sexy Xe |
|||
| Top | |
|||
| mendyxr6 |
|
|||
|
have a look at bestmufflers.com
they have and off the shelf one but i thinks its about a grand
_________________ kangaroos and radiators are a bad mixture |
|||
| Top | |
|||
| blownhead |
|
||
|
Hey mate,
I have a fairlane that came out standard with a dual system. I would recommend going to an exhaust building shop and having one made up from scratch. I had my old system duplicated with a quater inch larger diameter for each pipe. If u get stuck I can take a photo of my old system so they may be able to copy it.
_________________ These days milk & juice are quiet powerfull |
||
| Top | |
||
| Lay3d_low |
|
|||
|
hey thanks for the link, i couldnt find it on there but ill keep looking thanks
and yeh i dont know any places that would make on from scratch, only place that remotly come close was lilfords exhuast in thornton newcastle. but in saying that still wasnt what i was after.
_________________ Sexy Xe |
|||
| Top | |
|||
| Ausman |
|
|||
|
i had 2 e series xr8's both i had twin 2.5's put on from the same place. my el was on superlows, and the pipes used to hit the diff on big bumps, made a fairly bad noise, so i used to put a blob of sickaflex on the impact spot, dampened the noise and would last a few months. the exhaust place tried to rebend it, but couldn't change much. there is not a lot of room, but a good place will do it. but if u lower ur car its probly going to hit. as for price both systems were 550 with nice tips.
here is some pics of the system on the ef Attachment: 1.jpg [ 144.14 KiB | Viewed 197 times ] Attachment: 2.jpg [ 111.72 KiB | Viewed 197 times ] Attachment: 3.jpg [ 131.69 KiB | Viewed 215 times ] Attachment: 4.jpg [ 192.17 KiB | Viewed 221 times ] |
|||
| Top | |
|||
| SLO247 |
|
||
|
{USERNAME} wrote: Hey mate, I have a fairlane that came out standard with a dual system. I would recommend going to an exhaust building shop and having one made up from scratch. I had my old system duplicated with a quater inch larger diameter for each pipe. If u get stuck I can take a photo of my old system so they may be able to copy it. I'd LOVE to see a few good pics of it! |
||
| Top | |
||
| XFWAGON |
|
|||
|
Go to a shop and TELL them you want one made. They are too lazy if they say they can't do it.
Mick (NCIILANE) has one on his LaneTD, and i know of a few others. What mufflers are you running? As this will affect how the pipes go over the diff. If you run hot dog mufflers, you could do Micks style and they go over the diff on the drivers side at the same location. If you run larger, oval mufflers, it's more difficult as the pipes have to come up over the diff on both sides and then bend to go out the drivers side exit as the fuel tank takes up the entire passengers side  I was going to do the later, however i have now ordered some Magnaflow Magnapacks (better version of a hotdog muffler) which will allow me to run over the diff at the same point saving me a few $$. |
|||
| Top | |
|||
| Lay3d_low |
|
|||
|
Quote: Ausman looks very smick, i knew it had been done, and as XFWAGON said, they to lazy to do it lol. am i right to stick them photos on my mobile for explanatory purposes to soem of these exhuast places? XFWAGON you reckon run hot dogs to make a lil more room and easy to fit it all. and sadly the fuel tank does take up a fair bit of room.
_________________ Sexy Xe |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
{USERNAME} wrote: XFWAGON you reckon run hot dogs to make a lil more room and easy to fit it all. and sadly the fuel tank does take up a fair bit of room. the-garage-f53/mick-s-garage-t65504-40.html scroll down half way, there are a couple of pics and a sound clip the-garage-f53/mick-s-garage-t65504-180.html and down the page here is the over the diff section |
|||
| Top | |
|||
| Lay3d_low |
|
|||
|
ahhh very tidy. i always thought mick ran a single 3inch but there ya go
i think im gona have to force some shop to make one up for me lol
_________________ Sexy Xe |
|||
| Top | |
|||
| Ausman |
|
|||
|
yeah do whatever u want with the pics. that system had just the 2 redback mufflers, and it wasn't overly loud. there is a vid on utube http://www.youtube.com/watch?v=hYQlCKua_Zk thats with the standard crappy headers and cats. i then put a set of hurricane try y's and highflow metal cats, it sounded much meatier after that, but i dont have a vid of it
|
|||
| Top | |
|||
| Lay3d_low |
|
|||
|
doesnt sound to bad, alot louder the nwat i currently have on mine. got lukey headers high flow cats in 2 1/2 single. much rather dual 2 1/2 tho
_________________ Sexy Xe |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Exhaust dynamics in Rivervale W.A. can do it. I've seen a 304 stainless system done by them on an EL XR8...Supoib! Of course this means someone over there should be able to do it!
|
||
| Top | |
||
| Lay3d_low |
|
|||
|
yeh im gonna go hunting again tamoz, get some one to make me wat i want, anything can be done, if they can put tvs in show car wheels and underbodys then i can get a daul exhaust made up lol
_________________ Sexy Xe |
|||
| Top | |
|||
| nothin suss |
|
||
|
Manta in WA make an off the shelf mandrel twin system. Any muffler format you like...
Tuffcarparts.com (Justin) can get them ordered and shipped here for a ripper price. http://www.mantapro.com.au/products/pas ... an-dual-2/ http://www.tuffcarparts.com/
_________________ 2007 RANGER 4X4 CREW CAB |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 39 guests |
