|
| Mackagtho |
|
||
|
Hi can someone tell me whats involved in putting an Au xr8 220kw engine in my ED 5.0.
Advice needed on what will change over and what wont? will au injectors and tb plug into ed harness? best ecu to run this or go with stock ecu and tuner? will i be able to run au coil packs? any other electrics & sensors needed to be changed over?
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| jagga |
|
||
|
huy mate if u get a chance have a look in to my saga... i started off with this idea and have now upped the projet to a 60k drag car...
its bit of buggering around. id say, what ever your budge is. to double it. all i did with the injectors was snip the wires in the injector hats. and spliced in some ev6 injector hats. u can purchase them thru bpt motorsport. SITE SPONSOR. enjoy...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| One Drone |
|
|||
|
Lots of work mate. You are better off pulling the good bits and putting it in your car.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
