|
| Littlefoot |
|
|||
|
Quote: 250 at the fly is a realistic goal with cam and tune.. Well that's somewhat of a relief, weighing in a couple of hundred kilos lighter might give me a small chance against the boss xr8s despite being 30kws shy  Although I'd probably need a 3:45lsd in the diff aswell... now that'll be a whole new thread coming up  as id have to modify the bearing to fit the common sedan diffs rather than sourcing the uncommon xh/g 3:45.
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| Littlefoot |
|
|||
|
Actually I think it might be 40 shy...
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| WARMACHINE |
|
||
|
Only when those boss xr8's start running 13's, then you will have problems keeping up.
|
||
| Top | |
||
| Matt_jew |
|
||
|
{USERNAME} wrote: Quote: 250 at the fly is a realistic goal with cam and tune.. Well that's somewhat of a relief, weighing in a couple of hundred kilos lighter might give me a small chance against the boss xr8s despite being 30kws shy Although I'd probably need a 3:45lsd in the diff aswell... now that'll be a whole new thread coming up as id have to modify the bearing to fit the common sedan diffs rather than sourcing the uncommon xh/g 3:45.What needs to be modified? A 3.45 centre will go into an XG or XH housing as a direct swap.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Littlefoot |
|
|||
|
{USERNAME} wrote: Only when those boss xr8's start running 13's, then you will have problems keeping up. I'm quite interested to see how quick she'll go down the quarter with the new motor, cam and tune. What sort of times are people pulling with 240/250kw NA at the fly with these Windsors in E/AU series? It'll be similar power and less weight than my (light modded) Aristo and that pulled a 13.7/13.9
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| Littlefoot |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Quote: 250 at the fly is a realistic goal with cam and tune.. Well that's somewhat of a relief, weighing in a couple of hundred kilos lighter might give me a small chance against the boss xr8s despite being 30kws shy Although I'd probably need a 3:45lsd in the diff aswell... now that'll be a whole new thread coming up as id have to modify the bearing to fit the common sedan diffs rather than sourcing the uncommon xh/g 3:45.What needs to be modified? A 3.45 centre will go into an XG or XH housing as a direct swap. Really?? that would be awesome! Has anyone done the mod on these forums because I couldn't find anything. I went to a diff specialist in Adelaide last Saturday and he said it required a different main bearing 
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| Littlefoot |
|
|||||
|
{USERNAME} wrote: If you want to know a few other telltale 200 vs 220 pointers the key one is the heads. The 220 will have the intake ports port matched (this should be obvious by the machining marks in the first half inch of the port). It will be very clear if you take the heads off - the 220 had the big valves. Couldn't see/feel any porting.
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||||
| Top | |
|||||
| Littlefoot |
|
|||
|
Pretty sure my inlets were 46.97 mm. Not sure what the 220's had, I can only find specs on te50 svo
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
it doesn't look like it...
I say its a 200 |
||
| Top | |
||
| Littlefoot |
|
|||
|
Yeah, doesn't have the tickford TB but I haven't measured its diameter
I have no idea what ford have done with this motor. . If it's a 200 it should have crane rockers
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
yes and no... from other threads ive come across it appears that some of the late 200s got the 1.7 as well..
if you have the engine number go to ford etis.com and click vehicle add "6fpaaa" to the beginning of the engine number and it will tell you exactly what year and month and what car its from... |
||
| Top | |
||
| Littlefoot |
|
|||
|
Thanks for contributing so much to the thread TROYMAN, appreciate all the advice.
I have the shell it came out of so I could ring Ford with all VIN, build date etc. Although, I was under the impression Ford weren't always sure about what went into the cross overs "mixy uppy" motors.
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
if you have the shell, look at the month and year..
series 2 au xr8 sedan was 200kw up to the end of may 2001, then from june 2001 they were all 220kw |
||
| Top | |
||
| Littlefoot |
|
|||
|
Should ring em about the ex cop car AU1 v8 my gf is looking at too. Feels like it's got a bit of go but not sure what was factory and what was put on after factory for the police.
_________________ It's always funny until someone gets hurt. Then it's just hilarious. |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Cop cars have no higher performance than any other car.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
