Fordmods Logo

AU III 220kw V8 into EF?? 

 

Page 1 of 2 [ 27 posts ] Go to page 1, 2  Next

 
 Post subject: AU III 220kw V8 into EF??
Posted: Sun Jun 26, 2005 9:21 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 552

Joined: 20th Jun 2005

Ride: XR Fairmont

Location: Western Suburbs
VIC, Australia

any1 know if its possible to drop in a AU III 220kw V8 into my ef?
i have found the engine and 5 spd gearbox cheap wit nothing wrong and wanna know if its possible?
wouldnt mind doing this if someone else has done it?
and how hard of a job is it changing auto to manual??

 

_________________

Image

Top
 Profile  
 
 
Posted: Sun Jun 26, 2005 10:11 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

Is the EF a V8? If so its a fairly straight forward mod IMO, basically the same engine although there are a few little things you have to work around.
Top
 Profile  
 
 
Posted: Sun Jun 26, 2005 10:27 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

mmmm
should bolt right in
not sure about the EF ECU controling it

you got a V8 now i pressume?

changeing from auto to manual is easy/hard
do a search on here has been covered
basically u need box.pedal box, clutch etc and tailshaft for starters
then the manual ecu

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sun Jun 26, 2005 11:03 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 422

Joined: 23rd Mar 2005

Gallery: 5 images

Ride: EL XR6

Location: Near Perth
WA, Australia

I think I read elsewhere that his car is a 6cyl auto at the moment.

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 12:52 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

{USERNAME} wrote:
I think I read elsewhere that his car is a 6cyl auto at the moment.


if thats the case not worht the drama

as a whole new wiring loom needs to be intsalled along with a new fuel system.
not sure if the lines are the same as the 6

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 1:25 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 552

Joined: 20th Jun 2005

Ride: XR Fairmont

Location: Western Suburbs
VIC, Australia

OK
thanks guys

well im still considering it...
ive been searching through the posts but i cant find any info

can some1 leave a list of things they think might need changing for 6 to 8 and also auto to manual?

if u can would be good

thanx

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 1:39 am 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 5313

Joined: 6th Nov 2004

Gallery: 4 images

Ride: Surf, Turbo Diesel

Location: Melbourne, S.E Suburbs
VIC, Australia

johnny you should try just working the 6 like pyroay did...

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 2:08 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 552

Joined: 20th Jun 2005

Ride: XR Fairmont

Location: Western Suburbs
VIC, Australia

i know i can work the 6

for a few grand i can have it at 220kw (and thats just NA not turbo or supercharged)
i already looked into that

but its not the power n speed im after
a 6 will never sound like an 8

thats what im after...
only the power of a stock 8 wit a nice exhaust
the only modification id do is put a unichip or sumthing with it and prob a cold air intake
im building a cruiser... not a speed demon
stock v8 power wit little things is all i want
if it can get me a mid 14's on the quarter id be happy

and even if i was to think to sell my car and buy 1 with an 8... how many ef/el have you seen for sale with an 8 and a sunroof?
coz im not gonna spend $2000 like the sunroof ive got now
that $2000 could go towards sumthing else

theres too much mucking around buying and selling cars
as my family is already trying 2 sell 2 of ours

seeing as my dad was a mechanic he will help me change lots of the parts coz everything done to my car mechanically, as in lowering, servicing, changing parts... has been done in our garage at home
we got a 4 car garage so i got the space and time at home to change things
ive already got an engine crane as well

so its just a matter of weighing everything up and seeing what i need and the money involved

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 3:44 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

ok u have a i6 auto and u want a V8 manuaL?
mmm

ok well first off you will need the V8 and the manual. also a complete new exhaust.
then the clutch pedal box and tailshaft for the manual, also the gear shifter and gear shifter boot

then a different fuel pump, and associated fuel lines
eg does the new motor have the fuel rails and injectors?
also you will need the V8 ecu
and the V8 wiring harness from a V8 EF
now this is a complete front harness from the ECU forward
ie dash has to come out to refit it
also u will need a V8 cluster for the taco to work

i am sure i have missed a few things
it is a s**t OF WORK
the money u spend on the conversion can be better spent on the 6 and getting more grunt in the end

ie a good exhaust will cost you $1200 alone!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 10:15 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

As off putting as it is its all true..
Id look into getting a new car, thinking EL, v8, sunny - not THAT hard t find, theres harder to find trust me! :wink:
Im sure you could get a nice dollar for your car, looks tough - better than spending 6-10k on swapping to a 5L v8 thats been all chopped up n had a conversion on.
If I were you, stick it out with the 6 or advertise your car on carsales n just see where it goes, you might get a good price, and you might get it fast..
:idea:

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 12:10 pm 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

Check out Waggin's thread "Firey Fairmont"...

Now, that was a 302HO from E series falcon into the I6 EB... but you get the idea.

Fuel pump and lines will be fine. The XR8 engine will most likely have the correct fuel pressure regulator.

Physical fitment if the engine and box shouldnt be too nasty... not sure on the K frame but i'd say you need new engine mounts (with any luck these come with the engine, about $300 each from fomoco IIRC)...

Then wiring. I'd say an EF V8 ecu would be able to control it all ok but the MAF calculations wouldnt be spot on... also not sure if the AU engine harness would be compatible?!? You'd have to examine the wiring diagrams....

If you had access to a decent workshop and can swing a spanner reasonably well it'd be worth it.

If you have to pay for all of this to be done, do yourself a favour and sell the EF I6, buy an EF/EL V8 and work it up to 220kw spec.... i.e. heads, intake manifold...

 

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 12:27 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Wouldn't you need to put in an AU ECU if you were to slot in an AU XR8 motor? I was under the impression that AU XR8's had bigger injectors so the matching ECU would be important?

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 12:32 pm 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

{USERNAME} wrote:
Wouldn't you need to put in an AU ECU if you were to slot in an AU XR8 motor? I was under the impression that AU XR8's had bigger injectors so the matching ECU would be important?


Yeah i think the 220 had 24s. Fitting an AU EEC would probably be a nightmare (smartshield, dash/BEM integration...)

Probably best addressed by using an EF EEC with an aftermarket MAF calibrated for a 19# eec running 24# injectors....

 

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 12:50 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 552

Joined: 20th Jun 2005

Ride: XR Fairmont

Location: Western Suburbs
VIC, Australia

yeah i can see what u guys r saying

the last guy i spoke to never said anything bout changing fuel lines or tail shafts

he was sorta old skool and 2 him it was a matter of changing engine and gear box...

but prob older cars as in XA XB were different??

i saw a few cheap ef/el fairmonts with 8
the thing is i know how hard it is 2 sell a car coz were trying 2 sell ours...
but ill think bout it
coz im thinking of a new paint job anyway
so if im gonna sell it ill do it after i buy another 1

but for the time being gotta think bout it...

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 5:35 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 552

Joined: 20th Jun 2005

Ride: XR Fairmont

Location: Western Suburbs
VIC, Australia

what if i was to "FIND" a ef/el xr8?

would it be worth the work?

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 27 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 65 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 2:48 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names