|
| udbdevo |
|
||
|
simple questions
difficulty of dropping au axr8 series 2 engine...220kw ones into an EF... also u reckon it would be hard to source one of these |
||
| Top | |
||
| Vic |
|
|||
|
Should go straight in but be aware that the water pump in those AU's have a shorter pulley shaft than an E-series water pump so if you intend to add underdrive pulley's, the water pump pulley might interfere on the balancer.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| TS50EB |
|
|||
|
I have done this to an EB. Check out this page -
http://www.fordmods.com/forums/show-off ... 5-920.html What is the car you are starting with, obviously an EF, but is it a V8 already? How far do you want to go with the engine fit? For example- AU ECU, A/M ECU or a chipped EF/EL ECU? Dizzy or coil pack? The accessories, EF or AU? If you want more info PM me and I'll help as far as I can. Chris
_________________ The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else. |
|||
| Top | |
|||
| udbdevo |
|
||
|
nah the EF is currently a 6.
not to sure as how far i am to go. The engine will in time have more work done to it but for the time being will remain stock...INSURANCE!! so i guess id like to do a complete changeover or as little as possible without the fuss. thanks |
||
| Top | |
||
| XR9UTE |
|
||
|
If you get the whole harness with the engine you can keep the engine as is. Seeing as you have a six this would be the way to go as it's easier(less time consuming) than splicing into a six cyl harness. If you don't get the BEM and column it's ok because smartshield can be flashed out of the EEC.
|
||
| Top | |
||
| TS50EB |
|
|||
|
I contacted about ten ford wreckers around the country, took close to 3 months for an engine to come available.
If you do get the engine harness and ecu, try and get a complete AUII dash harness incl ign switch wiring. That way you can have the smartshield setup too.
_________________ The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else. |
|||
| Top | |
|||
| udbdevo |
|
||
|
and sourcing one of these motors?
how difficult? |
||
| Top | |
||
| TS50EB |
|
|||
|
See my reply above, took about 3 months to find one, had 44,000 km on it.
Might be easier now, just put the word out amongst wreckers around Aus especiaaly around S.A. Ask especially at your local Ford wrecker, they may have some very good contacts.
_________________ The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else. |
|||
| Top | |
|||
| Vic |
|
|||
|
Have you tried FTG Salvage?
If he has one he might be willing to freight one to you.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| udbdevo |
|
||
|
how much did u pay for the motor?
|
||
| Top | |
||
| TS50EB |
|
|||
|
I got a good deal as I know the guys at my wreckers well.
$3500 + my old engine and box. For that I got engine complete, accessories, ECU, BEM, Steering column and all the au wiring i needed. Remembering this was close to 5 years ago, and the eng only had 44000km on it.
_________________ The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else. |
|||
| Top | |
|||
| Mackagtho |
|
||
|
you got bent over.... $3500 from a mate, I'd be expecting a 5.6 stroker for that much!!
I got a 200kw handbuilt ticky one with 80 thou km for $1600, from the local wreckers.
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| Mackagtho |
|
||
|
opps just read the 5 years old part
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| TS50EB |
|
|||
|
Mackagtho,
Yes it was a very good deal. The guys even held onto it for me for a month until I could get there to pick it up. At the time they wanted to sell it for somewhere between $5500 - $6500. I even got the owners manual from the TS it came out of. Apart from being a T2 TS50 handbuilt engine, it is one of the rarer engines with the SVO alloy heads instead of the GT40P heads. Chris
_________________ The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else. |
|||
| Top | |
|||
| tones au2 xr8 |
|
||
|
im selling my 300hp to the tires au windsor for around $4000 including pacemakers, its done 86000km, heads and cam have done 16000.and comes with edelbrock tb and spacer , FPR.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
