|
| Benny D |
|
|||
|
hey guys. noticed this a day ago. seems to be a almost valve train rattle when my engine is under load.
doesnt do it when free-revving and wont do it when cold or under light throttle. almost sounds like low oil but i know its not too low. could it be the oil itself breaking down due to heat soak? its caliber 5/30 and im about to put some of the new magnitec 10/30 in to try eliminate the issue. cheers. post number. 1000  
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| bfxr8330 |
|
||
|
Hi there
Can i ask you did you fix or find out the problem to this as i have a Ba xr8 ute sounds like same issue we thought it was a lifter but have since been told its a bottom end issue. Thanks for your time Regards Dean |
||
| Top | |
||
| cjh |
|
|||
|
You can use a 10W40 oil too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Bruizer |
|
|||
|
like cjh said,
you can use a 10/40w, the 40w wont break down with energy as quick as the 30w dont know what Supercheaps Caliber (caltex) oils like but i use Nulon oils for everything & its pretty impressive stuff. magnitec oil is pretty sticky stuff but remember that if theres foreign bodies in the oil that they stick with the oil also. good luck 
|
|||
| Top | |
|||
| Benny D |
|
|||
|
ford-v8-f2/ba-3v-phasers-goone-t110254.html
Unfortunatly I think it was the beginning of the end of the phasers. The link I just put up I done about a week or two after this one. On a side note I'm fairly happy with the magnitec so far. And that calibre was shlthouse.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| bry40l |
|
|||
|
{USERNAME} wrote: http://www.fordmods.com/ford-v8-f2/ba-3v-phasers-goone-t110254.html Unfortunatly I think it was the beginning of the end of the phasers. The link I just put up I done about a week or two after this one. On a side note I'm fairly happy with the magnitec so far. And that calibre was shlthouse. can i ask what made you try their oil in the first place? i never completly cheap out on oil (except i bought coles brand for the laser  )did someone tell you it was ok stuff?
_________________ BF XR6 |
|||
| Top | |
|||
| Benny D |
|
|||
|
Yea pretty much was told it was alrite and it had a shiny bottle.... Lol.
I figured rather then go on what others say I'd give it a run. I like to figure stuff out for myself most of the time. Haha.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 32 guests |
