|
| mick |
|
||
|
hi to all can somebody help me regarding i have a bad vibrations whiring noise louder when i have people in the back. car has only been lowered to tickford specs :
 thanks.
|
||
| Top | |
||
| Interceptor |
|
||
|
get your uni's checked
_________________ Banned |
||
| Top | |
||
| bundybloke |
|
||
|
is it only since its been lowered
check balance of rear rims/tyres for buckles and check for seperation in the tyres (when the tread starts to come away from the case) it causes and egg shape in the tyre. if not we'll look elsewhere |
||
| Top | |
||
| fairmont1998 |
|
|||
|
Is it an EL?
If it is its a common problem. Lowered ELs drop the pinion too much and it causes the vibration. More noticable with a bootful of stuff or people in the back as it makes the rear drop even further.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| mick |
|
||
|
no its a ef gli only with king spring lows not super lows
|
||
| Top | |
||
| bundybloke |
|
||
|
I had and EF XR6 with the tickford suspenion, I lowered that even further
and could take the family and all our gear away on holidays with no problems so I think is not in the lowering. Maybe jack the rear of the car up on some blocks and do some tests with your mates, put the car in gear let the rear wheels turn get your mates to hope in look and listen for noises to see if its still there note under load could even be further back up the drive train in the box. |
||
| Top | |
||
| mick |
|
||
|
thanks mate i will give it a go & let you no mick
|
||
| Top | |
||
| Andrew J |
|
|||
|
The tickford arms that locate the diff are slightly different in length and thus affect the pinion angle before lowering. So lowering an xr and lowering a non xr cant really be considered equal. You may need to look at changing the pinion angles so that they dont produce these bad harmonics. Either that, or kick everyone out the back
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| Andrew J |
|
|||
|
Oops, wrong thread!
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
Last edited by Andrew J on Sat Aug 06, 2005 1:27 am, edited 1 time in total. |
|||
| Top | |
|||
| Andrew J |
|
|||
|
I have no idea what im doing, so heres a picture of a rabbit with a pancake on its head
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| joolz |
|
|||
|
Incorrect pinion agle will cause vibration, but as u said it was done to tickford specs so i take it the pinion has already been changed to allow for the lowering. If so i would replace the uni joints as for the past 100,000 k's plus they have worn into the old pinion angle (grooves wear into uni spider/cross)
|
|||
| Top | |
|||
| bundybloke |
|
||||
|
Makes me laugh
andrew i like rabbits too
|
||||
| Top | |
||||
| mick |
|
||
|
i will give that a go . also i notice when i change fom pwr mode to economy mode the vibration is so much noticeable much more louder when i increase speed i have change the whole diff & its still there mick
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
