|
| northerlythechamp |
|
||
|
Hi,
I have never owned a V8, have owned and had mates own a couple falcon 6s and played around with cams and what not, also some mates with turbo japs and the like. But I have my heart set on (one day) building a v8. Pretty much I would like to know roughly what went into this car: http://www.youtube.com/watch?v=ektTw5lpoyY It is d**k Johnson's 83 XE. I understand it has a 351C and whatnot but if anyone knows more specific things please do share. What I would like to know is: Engine - stroked? Obviously strengthened bottom end, highly ported head, big cams, high flow manifolds etc. What brands/products on the market would I be using to build such an engine ie. what carbys/manifolds etc Gearbox - mine would have to be a manual, which gearbox would be used in this car? Could you retrofit a t56? Diff - strengthened 9"? I would also love to knock if a company sells a similar bodykit to that one. The aforementioned gear would all go into an XE. Cheers for your advice |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Yep they all can be done with expertise, components and money !!
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| schnoods |
|
|||
|
Well it wouldnt be bad to have a replica of that at all!
Engine - 351-383-393-408 depends on the budget and use, you can make some alot of power from a stock stroke 351. Heads either CHI or AFD. They make them in alloy and in 2v,2v,4v and in a number of sizes to suit cubes and applications. They are the ducks nuts in terms of heads. A single plane high rise manifold will supply enough, a dual plane if its a streeter, and good size vac secondry for street, DP if drag/race. Parker make a good manifold, if you are running CHI heads, it is good to run one of their manifolds too, they are the goods. Gearbox - Toploader will struggle if its a heap, t56 can be retrofitted, Tremec TKO 600 is another option too (probably ideal, better ratio's and smaller insize) and can handle around the same amount of grunt. If you would want an auto, a C4 but i dont think you're after one.. Diff - 9 inch, depends on how many spline axles i guess and how much power you're running.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| silique |
|
||
|
{USERNAME} wrote: Well it wouldnt be bad to have a replica of that at all! Engine - 351-383-393-408 depends on the budget and use, you can make some alot of power from a stock stroke 351. Heads either CHI or AFD. They make them in alloy and in 2v,2v,4v and in a number of sizes to suit cubes and applications. They are the ducks nuts in terms of heads. A single plane high rise manifold will supply enough, a dual plane if its a streeter, and good size vac secondry for street, DP if drag/race. Parker make a good manifold, if you are running CHI heads, it is good to run one of their manifolds too, they are the goods. Gearbox - Toploader will struggle if its a heap, t56 can be retrofitted, Tremec TKO 600 is another option too (probably ideal, better ratio's and smaller insize) and can handle around the same amount of grunt. If you would want an auto, a C4 but i dont think you're after one.. Diff - 9 inch, depends on how many spline axles i guess and how much power you're running. To the best of my knowledge a Tremec IS a 5 speed Top Loader with an overdrive. |
||
| Top | |
||
| green car |
|
||
|
Djs xd/e falcons had between 450-500flywheel hp, alot for back then.They were standard stroke 351 clevos
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| orloxsis |
|
||
|
Pretty sure a tree went into that motor!
_________________ AU XR8 manual. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 37 guests |
