|
| Atchy |
|
||
|
Hi there groovers. I got an EF 5 ltr and when i drop the foot, it makes good power up to about 2800 - 3000 rpm then it starts blowing black smoke out the a*** and loses power until i back off again. i have cleaned the Maf sensor, changed plugs and checked for vaccum leaks. all seems to be fine. anyone got a reason why this might be happening or has anyone had a simular problem? Oh yeah, i did notice the dizzy cap was a bit marked on the inside and the problem seems worse the hotter the engine gets. Any help greatly appreciated.
Thanks fella's and merry christmas to all
_________________ DUDE, if the tyres aint smok'n then somethings wrong |
||
| Top | |
||
| dynomite!!!! |
|
||
|
Every time I've ecounterd a problem similar to yours its been the HT leads. And they do sometimes get worse as they get hotter.
Also if you choose to test them with a multi meter before replacing them, be sure to twist and bend them while testing because the fault can be intermitant.
_________________ I caught you a delicious bass |
||
| Top | |
||
| heartagramfan |
|
||
|
check your plugs, mine was doing the same, and i put new plugs in as well as leads and it made a huge difference
|
||
| Top | |
||
| TickXR |
|
|||
|
chech for white powdery substance on your headers (tell tale signs of a crack)
This would be telling your oxygen sensor that motors running lean and dumping in more fuel causing black smoke also check oxygen sensor is working properly by the way Black smoke is usualyy rich fuel so either computers getting tricked into supplying more fuel into motor or your injectors are faulty and staying open
_________________ If you don't do it whilst your livin, you aint got no bloody chance when your dead!!! |
|||
| Top | |
|||
| One Drone |
|
|||
|
Not enough crankcase ventilation? Check/replace PCV valve and hoses to intake manifold and the one from tb to oil filler. Excessive blow by..
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| nicskitz |
|
|||
|
hmm,
have you checked the timing? could be out,
_________________ Too many cars atm
|
|||
| Top | |
|||
| Atchy |
|
||
|
{USERNAME} wrote: hmm,
have you checked the timing? could be out, Thanks man. Checked changed plugs and leads today and yes the timing was out a fair bit. She is pulling sweet now right through the rev range
_________________ DUDE, if the tyres aint smok'n then somethings wrong |
||
| Top | |
||
| Atchy |
|
||
|
{USERNAME} wrote: chech for white powdery substance on your headers (tell tale signs of a crack)
This would be telling your oxygen sensor that motors running lean and dumping in more fuel causing black smoke also check oxygen sensor is working properly by the way Black smoke is usualyy rich fuel so either computers getting tricked into supplying more fuel into motor or your injectors are faulty and staying open thanks mate. i have changed plugs, leads and set the timing but is there any way of checking the oxygen sensors? I got 200+Kays and they are most likey on thier way out anyway
_________________ DUDE, if the tyres aint smok'n then somethings wrong |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
