Fordmods Logo

Can you identify the waterleak from the pics 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Can you identify the waterleak from the pics
Posted: Wed Nov 17, 2010 6:15 pm 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

Well, the Sprint sprung a water leak on the way to work...kept topping her up and managed to there and back home ok.
Its a continuous drip from the top rear LHS of the engine, about 2L/10min. Stuck the digital camera in and grabbed a couple of shots...plenty hot in there.
It looks like its coming out of the gasket but that volume leak would surely have it down a cylinder. Runs smoothe. Could it be tracking there from beneath the air intake? Not sure whats there to leak. Any ideas fellas?

 

 

Attachments:
leak1 copy.jpg
leak1 copy.jpg [ 137.58 KiB | Viewed 214 times ]
leak2.jpg
leak2.jpg [ 70.56 KiB | Viewed 209 times ]

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Wed Nov 17, 2010 6:24 pm 
Getting Side Ways
Offline

Age: 38

Posts: 996

Joined: 9th Aug 2005

Ride: BA XR6T ute

Location: frankston
VIC, Australia

id say heater tap
Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Wed Nov 17, 2010 6:32 pm 
Tyre Shredder
Offline
User avatar

Age: 36

Posts: 302

Joined: 5th Sep 2007

Gallery: 1 images

Ride: 09 FG XR6

Power: 208 rwkw

Location: Wallerawang
NSW, Australia

heater tap, welsh plugs or maybe thermostat housing where it bolts to the head could also be the by pass hose

 

_________________

2 FOR TURNING & 2 FOR BURNING

Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Wed Nov 17, 2010 7:24 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Looks like a head gasket from those pics because I can't see anything tracking from the intake side, but it could be the intake gasket or even the EGR coolant hose/barb or the heater tap/hoses. Get in there while it's running.
You have the original GT40 heads I see.
Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Wed Nov 17, 2010 9:39 pm 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

{USERNAME} wrote:
Looks like a head gasket from those pics because I can't see anything tracking from the intake side, but it could be the intake gasket or even the EGR coolant hose/barb or the heater tap/hoses. Get in there while it's running.
You have the original GT40 heads I see.


It was running when the pics were taken. Its impossible to see the back of the motor or get a camera in there even when its cool..
Looks like I will have to remove the intake to get a better view

Yep, has the GT 40s..how do you tell? The vertical bars?
Looking for some alloy heads to reduce the weight and improve the handling but not sure what to buy. Its a good time to buy with the high ausie dollar.
thanks guys
G

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Thu Nov 18, 2010 10:51 am 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

I wouldn't pull anything apart until you've actually found where the leak comes from. You might do better with a mirror on stick from above?
Yep three bars = GT40. Some AFR 165's would be the shot.
Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Thu Nov 18, 2010 8:48 pm 
Getting Side Ways
Offline
User avatar

Posts: 636

Joined: 21st Nov 2008

Location: Melbourne
VIC, Australia

im tipping it will be the EGR water hose that goes to the inlet manifold.
happened to my old 5ltr.
if you lay on the engine carefully you can see back there easy enough.
Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Tue Nov 23, 2010 10:23 pm 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

{USERNAME} wrote:
im tipping it will be the EGR water hose that goes to the inlet manifold.
happened to my old 5ltr.
if you lay on the engine carefully you can see back there easy enough.

Big tick jaysway.
Yep tiny split in the EGR hose. Bugger to get to so took the whole top off and replaced all the hoses. Actually by passed the EGR entirely.

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Tue Nov 23, 2010 11:02 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Just remember it's an EGR coolant hose so if you take them off without actually blocking the exhaust flow from the heads you actually increase the temp at the t-body.
Top
 Profile  
 
 
 Post subject: Re: Can you identify the waterleak from the pics
Posted: Wed Nov 24, 2010 1:01 pm 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

{USERNAME} wrote:
Just remember it's an EGR coolant hose so if you take them off without actually blocking the exhaust flow from the heads you actually increase the temp at the t-body.


You got me there...I'm quite ignorant when it comes to the EGR theory and function so excuse me.

At the TB, the egr plate is in the recirculated water line from the rear of the passenger side head to the water pipe along the drivers side head.
How does the TB get hotter if the water lines are disconnected?

And as far as the blocking exhaust flow, totally lost ...but thanks I will have to do some research on this. cheers mate

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Dec 26, 2024 12:17 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names