|
| xr6turnip |
|
||
|
I have a LTD v8 auto manufactured 12/95. I was thinking of fitting 3.45 diff gears but I remember back in the day reading that v8 LTDs got the 3.45s?
The performance tests back in the day had its acceleration on par with the swb cars including xr8. I find that hard to beleive considering weight. Under the car it says lsd but no ratio.
_________________ Gone to a better place |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: I have a LTD v8 auto manufactured 12/95. I was thinking of fitting 3.45 diff gears but I remember back in the day reading that v8 LTDs got the 3.45s? The performance tests back in the day had its acceleration on par with the swb cars including xr8. I find that hard to beleive considering weight. Under the car it says lsd but no ratio. I FIND IT EVEN HARDER-BARGE,3.08 or 3.23,but my DF runs 3.08 same as xr8,I6 ran 3.45 i think
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| xr6turnip |
|
||
|
no way they are 3.08...
I previously had an el 5.0 and i fitted 3.45s to it and i dont feel like the ltd goes any different. they must be 3.23s or 3.45s.
_________________ Gone to a better place |
||
| Top | |
||
| jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
It will have a 3:23 in it. When I had my Lane I upgraded to the 3:45 and there was a noticable difference on take off but not enough to worry fuel economy on the highway which was good.
Also the diff came out of a EF XR6 Sedan.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Only the Tickfords got the 3;45 final drive...
Std EF / EL's got 3.08 EB Xr8's have 3.27 final drives.. Imo a 3;45 would get it moving without sacrificing economy.. 3;7's would be better with larger dia wheels..Which most fit these days..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
{USERNAME} wrote: Only the Tickfords got the 3;45 final drive... Std EF / EL's got 3.08 EB Xr8's have 3.27 final drives.. Imo a 3;45 would get it moving without sacrificing economy.. 3;7's would be better with larger dia wheels..Which most fit these days.. Where's a good place to get the 3.7's from? I've been searching for some for a while. And I presume I can just buy a speedo cog to suit from the US? |
|||
| Top | |
|||
| xafalcon |
|
||
|
All E-series 5.0's I've owned have had 3.27 gears. EB1 Fairmont Ghia, EB2 Fairmont , ED SW Fairmont , NF Fairlane
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
