|
| XR9UTE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: It doesn't look like the MAF is there from that pic? autronics ecu or something. its running map/speed-density.. I know clampy. People were asking if the MAF was still there anyway....the pic suggests not that's all. Pete. |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: How come the RPM intake isnt suited to the combo? The shorter runners shift the torque curve to higher rpm. I would expect the normal Performer intake would "outperform" the Performer RPM at almost all points under 6000rpm... Can that be improved by fitting one of the edelbrock spacers between the upper and lower? You would need at least an inch spacer but that's not really enough plus it would probably hit the bonnet. |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: so bigger cam on the cards?
Pete you have a pm! Maybe, but we still need to know what you have now and it would be nice to know the compression ratio too? To fix what you have now I'd switch to a std performer upper, 65mm t-body and fit a 3" single exhaust and some underdrives from BPT. Pete. |
||
| Top | |
||
| -clampy- |
|
||
|
ah yeh no worries pete..
other than a performer manifold, maybe a ported(to flow a clean 250cfm) explorer? ie something in that league
_________________ current ride: worn out chuck taylors Last edited by -clampy- on Thu Dec 14, 2006 12:03 am, edited 1 time in total. |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: ah yeh no worries pete..
yeh other than a performer maybe a ported(to flow a clean 250cfm) explorer? No wuckers. It'll be cheaper to get a performer upper. Pete. |
||
| Top | |
||
| -clampy- |
|
||
|
mm oh yeh of course i forgot the lower could stay..
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| midge |
|
|||
|
i have a eb xr8 that was running a 15.2 standard i put a set of pacemaker extractors on removed the cats and ran a single 3" to the end with 1 luky muffler (sounds great) my next trip down the drags i ran a 14.6 i would def get the exhausht looked at
_________________ I couldn't repair your brakes, so I made your horn louder. |
|||
| Top | |
|||
| veeate |
|
|||
|
{USERNAME} wrote: i have a eb xr8 that was running a 15.2 standard i put a set of pacemaker extractors on removed the cats and ran a single 3" to the end with 1 luky muffler (sounds great) my next trip down the drags i ran a 14.6 i would def get the exhausht looked at
i doubt it was standard...off the factory they ran mid to high 16's IIRC...... |
|||
| Top | |
|||
| One Drone |
|
|||
|
It's possible! I get low 15's in the barge and all I've touched is the exhaust.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| -clampy- |
|
||
|
maybe its just some motors have stayed nice n tight with good comp while others are a bit more tired. for example some chap i know had a bog stock EF i6 auto that ran 15 flat
but yeh in stock form i pretty sure the v8s ran a 15.7 or something.. 15.2 from a stocker sounds pretty speedy especially since thats with stock exhaust, and upgrading that droped it to 14.6. never heard of a stock eb+zorst pulling anywhere near that off.
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Well, i have a 65mm TB and a 65mm EGR, willing to trade for your 75 if you are keen. I am outta flow with the new heads, would be keen to trade if it suits you.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| veeate |
|
|||
|
have you owned it since new.??? if not, how do u know someone elses hasnt done something to it...
|
|||
| Top | |
|||
| prydey |
|
|||
|
{USERNAME} wrote: i have a eb xr8 that was running a 15.2 standard i put a set of pacemaker extractors on removed the cats and ran a single 3" to the end with 1 luky muffler (sounds great) my next trip down the drags i ran a 14.6 i would def get the exhausht looked at
thats a very expensive risk you are taking there.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| midge |
|
|||
|
Performance:
(Falcon S XR8, 5.0L V8, 5 sp manual): Top speeds in gears 1st: 52km/h 2nd: 85km/h 3rd: 130km/h 4th: 181km/h 5th: 221km/h 0-100km/h: 7.7 seconds Standing 400m: 15.7 seconds added with a freezing cold night in tas with a decent set of tyres a 15.2 can be done and i also took the air filter out for the runs
_________________ I couldn't repair your brakes, so I made your horn louder. |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Any more luck here eed-250?
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
