Fordmods Logo

EF XR8- 28oz or 50oz 

 

Page 1 of 2 [ 19 posts ] Go to page 1, 2  Next

 
 Post subject: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 1:06 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

Hi,

Im looking at a 347 stroker short block and i was wondering what external balanced oz i need for my ef xr8.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 2:38 pm 
Getting Side Ways
Offline
User avatar

Age: 53

Posts: 3763

Joined: 25th Nov 2004

Gallery: 6 images

Ride: EFII 5.8 NOS TerroristGhia

Power: 274 rwkw

Location: Sydney Australia
NSW, Australia

The 5.0 is a 50oz external balance, and the 351W roller is a 28oz.

Your kit should specify what balance you need. If changing to a 28oz then i would suggest getting the entire rotataing assemble (balancer/crank/rods/pistons and flexplate/flywheel) all balanced as a matched set. Any good machine shop should be able to do this for your and your should see change from 500 for that.
Cheers
Brett

 

_________________

The Terrorist ED Retired due to RUST.
The TerrosistGhia, EF Ghia 351 EFI 5 Speed.
Millennium Falcon, Sleeper EL DOHC 6 Speed Manual EFI LPG
Member#1131
I didn't Vote for Multiculturalism, DID YOU!!!

Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 2:52 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

The short motor im looking at says its 28oz externally balanced assembly. Im not sure if its is fully balanced or what the go is. I have never brought a short motor like this before.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 4:12 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

{USERNAME} wrote:
The short motor im looking at says its 28oz externally balanced assembly. Im not sure if its is fully balanced or what the go is. I have never brought a short motor like this before.


Ask them? If it's new it's likely had a proper balance with a 28oz flywheel and 28oz balancer in place. Ask them what tolerance it was balanced to?
Personally I'd prefer to buy the engine with these components still attached...that way you know it's a complete balanced assembly.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 4:20 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

It is brand new. Its from Engine Masters Australia. Its a dart block.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... TQ:AU:1123

This is the assembly
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 4:26 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

{USERNAME} wrote:
It is brand new. Its from Engine Masters Australia. Its a dart block.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... TQ:AU:1123

This is the assembly


Ok email them.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 4:30 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

Just emailed them so hopefully i will have an answer about it soon.

Thanks for your help
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 7:52 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

Got an email back it doesnt come with fly wheel or balancer and they say it has a tolerance of about 0.5oz
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 9:44 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

It's NOT balanced then !!!

It's the counterweight of the crank that determines what balance it has....
28 is better than 50... 50 are all roller motors or EFI in Aust...
Most stroker crank assemblies can be neutral balanced too..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Mon Feb 21, 2011 10:56 pm 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

Im chasing the engine fro my ef xr8 can i still use this short block or im i better just buying a dart block and a stroker kit and doing it myself
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Tue Feb 22, 2011 2:10 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Actually it is balanced and the tolerance 1/2oz. This is about as good as you can hope for with a new engine that is not supplied with flywheel or balancer.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Tue Feb 22, 2011 3:28 pm 
Getting Side Ways
Offline

Posts: 2410

Joined: 4th Sep 2006

Location: Sydney
NSW, Australia

For the price he is asking u could get somone like keith craft to build it and send it over.............

http://www.keithcraft.com/

 

_________________

Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color]

Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Wed Feb 23, 2011 12:34 am 
Oompa Loompa
Offline

Age: 38

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia

Yeah but this is a DART block assembly built by DART. This place is just a reseller of them the cost of it plus freight from USA would work out roughly the same as the price from the place.
Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Wed Feb 23, 2011 12:40 am 
Getting Side Ways
Offline

Age: 36

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia

{USERNAME} wrote:
For the price he is asking u could get somone like keith craft to build it and send it over.............

http://www.keithcraft.com/

Beat $5700 AU for a Dart block 347? I think NOT!!!!!!!!!!!

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116

Top
 Profile  
 
 
 Post subject: Re: EF XR8- 28oz or 50oz
Posted: Wed Feb 23, 2011 1:04 am 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

{USERNAME} wrote:
{USERNAME} wrote:
For the price he is asking u could get somone like keith craft to build it and send it over.............

http://www.keithcraft.com/

Beat $5700 AU for a Dart block 347? I think NOT!!!!!!!!!!!


Why not?...email them too!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 19 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 11:58 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names