|
| SIK__M8 |
|
|||
|
Hey guys i have a ef xr8 with mods and i know its not legal but i really couldnt give a s**t but
What do i need to do to fit a carby on my ef 302 I know i need a lower intake manifold and a carby but wat else needs to be done
_________________ AU II XR8 REBEL!!! EB TURBO 6!!! |
|||
| Top | |
|||
| TKFD |
|
||
|
a trailer, cause you won't be able to register it.
|
||
| Top | |
||
| SIK__M8 |
|
|||
|
Im not sure if i made myself clear i dont give a rats f**k about legalities.
The car is registered and with the correct connections it will remain registered 
_________________ AU II XR8 REBEL!!! EB TURBO 6!!! |
|||
| Top | |
|||
| 66 coupe |
|
||
|
intake maifold
carby fuel pump / fuel regulator distributor with correct gear for hyd roller cam you need to retain the ECT sensor for the temp gauge in the dash to operate and also the fans if its auto then you also need to fit a tps to the carb and also feed the ecu a tach signal from the ignition in reality, better off sticking to EFI the carb is not going to make it go any better Better off putting a decent cam and aftermarket ECU in it. |
||
| Top | |
||
| bry40l |
|
|||
|
May I ask why your going carb? Not being negative just wanted to know
_________________ BF XR6 |
|||
| Top | |
|||
| SIK__M8 |
|
|||
|
My closest J3 chip tuner is a 3 hour drive away yes i have it done and set up but i wish not to spend $1000 every time i modify my engine. Plus i love the simplicity of a carby and the general way they operate.
I have manual gearbox I have upgraded engine conponents I just want to be differant and i can see similar power figures out of a decent carby
_________________ AU II XR8 REBEL!!! EB TURBO 6!!! |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Moates 1/4 horse is less than $300.
|
||
| Top | |
||
| Darcy4524 |
|
||
|
Love how you want to go with something different not many people do that most want what everyone else has. I love the idea of a carby as I also love the simplicity of them and I know more about carbs then I do efi.
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| SIK__M8 |
|
|||
|
Ok so far i have gone with weiand highrise stealth manifold. A 650 holley vacuum secondary carby. Ive ordered a holley fuel pressure reg to keep my factory pump. Ive also got myself a heap of new parts just to freshin the engine like new water pump new seals ect and i also got new flywheel new cam and all the good bits haha but yeh stay tuned
_________________ AU II XR8 REBEL!!! EB TURBO 6!!! |
|||
| Top | |
|||
| 347EBIIXR8 |
|
||
|
SIK__M8
Hi, Did you complete the carb set up? I am looking at a tunnel ram set up on my 347 EB XR8, thinking carbies instead of custom injector setup. How did you go with all the gauge, efi, sensors, wiring mods etc so it all performs normal??? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
