Fordmods Logo

ef xr8 wont start after head gasket change 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: ef xr8 wont start after head gasket change
Posted: Sun Dec 11, 2011 6:07 pm 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

hey all, having bit of an issue atm. on the way home from powercruise few months ago blew a head gasket and finally just got it all back together yesterday, then wont start.
did the timing with a light so many times, took dizzy out and adjusted crank put dizzy bak in to no avail, so really confused some help would be greatly appreciated
Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Sun Dec 11, 2011 6:13 pm 
Getting Side Ways
Offline

Posts: 700

Joined: 1st Jan 2006

Ride: Lots, all Fords

Location: Hamilton
New Zealand

Check for correctly earthed engine on #1 short head bolt, spark & fuel. If they are OK, it should start. If one/both don't work, do a fault scan

 

_________________

XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual

Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Sun Dec 11, 2011 6:16 pm 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

it def has spark checked that, and plugs are wet from fuel. the earth on that bolt wont fit anymore because i put in a arp head stud kit so i moved it to the middle bolt holding the alternator braket to the head. will that not get a good enuf earth??
Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Sun Dec 11, 2011 9:24 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Do you have spark ?? Are you sure the plugs are wet from fuel ??
It should be either spark or fuel ??
Borrow or buy a noid light and plug into an injector connector...
Check that all the loom connections are well pushed in...
Check smartlock or internal / S/L fuse ???

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Sun Dec 11, 2011 9:37 pm 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

yer man its strong spark, yer plugs were completely wet, quite confident that all the plugs are in. think smartlock is fine. seems like timing as its trying to kick over.
Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Mon Dec 12, 2011 8:08 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

Are you 180 degrees out with the dizzy?
Remember theres 2 TDC's for one complete engine revolution.
How far was the engine stripped? Did the cam come out for some reason? Or was it just simply heads off, then back on?

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Mon Dec 12, 2011 10:25 pm 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

thats what we thought at first but we switched everything round bout a million times ay. goin to me mechanic wednesday now as i havent had a car for ages and stressing out haha. motor was just stripped down and heads taken off( big job these fuel injected cars)
Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Mon Dec 12, 2011 11:52 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

No worries, firing order right aswell?

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Tue Dec 13, 2011 12:18 am 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

yer i bought one of those car manuals a while ago, pretty handy
Top
 Profile  
 
 
 Post subject: Re: ef xr8 wont start after head gasket change
Posted: Wed Dec 21, 2011 2:07 am 
Stock as a Rock
Offline
User avatar

Age: 34

Posts: 125

Joined: 2nd Apr 2010

Ride: EF xr8

Location: Albany
WA, Australia

got car bak today all good except one thing, mechanic had same issue but it fixed itself. anyway starts up fine idles fine and revs and drives fine, but after its warm will randomly at idle start goin up and down idlelin all ova tha place and if u turn off then will b hard to start but will. some ideas would be alrite, battery pretty flat but chargin it tonite n see how it goes
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: xhxr8man and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 5:29 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names