|
| wade |
|
||
|
g'day
i am replacing my old motor out of my xh ute with an au series 3 220kw xr8 motor but its all in and i cant wait to get it on the streets but the standard xr8 + pacemaker extractors wont fit in the ute with the gt40p heads dose any one know of any extractors that will fit in cheers
_________________ AUTOMATICS are like girls with hairy nipples YOU DONT WANT THEM!!!!! |
||
| Top | |
||
| One Drone |
|
|||
|
AU extractors won't fit into an EF-EL. You're going to need EF-EL extractors, or find some stockies somewhere.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| jeffb |
|
|||
|
Why wont they fit? I had Pacemakers on my EB with GT40P heads, Just made a couple of them hard to get out, and I had to get leads with 90 degree ends on them.
|
|||
| Top | |
|||
| One Drone |
|
|||
|
Pacemakers made for an EB will fit an EB. AU extractors won't fit E series as it fouls with the cross member.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| jeffb |
|
|||
|
{USERNAME} wrote: Pacemakers made for an EB will fit an EB. AU extractors won't fit E series as it fouls with the cross member.
I put GT40P heads on my EB, the extractors are designed for E7TE heads, so XH/EF/L should follow the same line. |
|||
| Top | |
|||
| Trikee |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Pacemakers made for an EB will fit an EB. AU extractors won't fit E series as it fouls with the cross member. I put GT40P heads on my EB, the extractors are designed for E7TE heads, so XH/EF/L should follow the same line. what he is saying, is do you have the au extractors on your car or are the pacemakers ones you already had on there |
||
| Top | |
||
| One Drone |
|
|||
|
The difference isn't in the heads. The AU is a different car.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| wade |
|
||
|
cheers i was under the impression that the ports were not quite the same as the earlyer heads thanks for putting me on the right track.
_________________ AUTOMATICS are like girls with hairy nipples YOU DONT WANT THEM!!!!! |
||
| Top | |
||
| jagga |
|
||
|
i doing the same conversion with my ef xr8....
pacie PH4000 extractors will fit. only prob will be the clearence on the furthurest left on each head sparkplug. i will post up pics of the clearance... are you going to use the coilpacks and everything or u converting it all back to original accesories so u can use your old loom... i found there was a lot of stuffing around with the electrics. on mine. so opting for original front end accesories just seemed like the easiest option... also did u get the au trans with it also... if so where are you planning to mount the oil cooler... if u need any info on this conversion give me a call on 0400269667. it may be preety helpfull.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| jagga |
|
||||
|
ok so im not sure if it will help u but here is a pic of the clearance...
also from experience. i would get yourself really good plugs that are gonna last coz it is going to make changing tha sparkpluge a big job... hope i have helped
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||||
| Top | |
||||
| XHII V8S |
|
||
|
What is an AU III 220kW motor worth these days?
Is it worth the conversion in say a XH ute with a 165kW V8 in it?
_________________ Pacies & single 2.5'. New manifold to come soon... |
||
| Top | |
||
| jagga |
|
||
|
roughly 3500. with trans..... but id say it depends on what ur buying it for. did u wanna run things like au power steering, au coil packs etc... pain in the but. use all ur old front end accesories and yes id say its a worthy mod... u get gt40p heads, yella terra cam n roller rockers, explorer intakes, 70mm throttle body and maf, need diff plugs put on it throttle body tho. can re use ur maf plug...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| Kilma |
|
|||
|
I thought AU II motors were 200kw, not 220?
_________________ The fast fun: Suzuki GSXR1000
|
|||
| Top | |
|||
| jagga |
|
||
|
it is a au3 motor... r u talking bout mine...kilma... if so yes it is au3. i was originally told it was taken out of a au rebel. but it was just a au3 xr8 it was removed from
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| jagga |
|
||
|
it is a au3 motor... r u talking bout mine...kilma... if so yes it is au3. i was originally told it was taken out of a au rebel. but it was just a au3 xr8 it was removed from
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 29 guests |
