|
| gunit18 |
|
||
|
anyone fitted these to their e series 5ltrs? after a set.
u reakon there will be enough clearance for them with the edelbrock intake? |
||
| Top | |
||
| offyaguts |
|
||
|
should be fine, but if you have the phenolic spacer you should have no worries at all.
also if you run into trouble with the rocker gear hitting the top of the covers, you can use two gaskets to raise them up a little |
||
| Top | |
||
| gunit18 |
|
||
|
will that be any trouble with the rocker gear? i have the non adjustable rr's. soon find out
|
||
| Top | |
||
| chooka |
|
||
|
Ive got them with two gaskets and I had to grind some of the castings to clear roller rockers.
_________________ ----------------------------------------------------
|
||
| Top | |
||
| playswithnitro |
|
||
|
G'day,
What is the part number on the valve covers you have? Which Edelbrock manifold? |
||
| Top | |
||
| gunit18 |
|
||
|
dont have the covers yet, was just seeing if they'd fit - cost around 300-350 i think but mite spend the cash elsewhere. i've got the edelbrock performer
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
I have the Cobra style Ford rocker covers. They fitted perfectly on mine and i have the an RPMII. No clearance issues at all, but i got the wrong set as they are for a NON efi motor and dont have the return for the the Throttleboddy as my standard ones did
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| playswithnitro |
|
||
|
If you need more clearance, Edelbrock make a manifold spacer to suit the Performer manifold. Part number is #8727
|
||
| Top | |
||
| Free347 |
|
|||
|
I have a Performer 5.0 manifold with a 3/8" spacer, 1.7 YT roller rockers and Ford Racing rocker covers - no worries at all.
|
|||
| Top | |
|||
| gunit18 |
|
||
|
A1 Hi Performance in Perth want $380 for a set of Efi rocker covers, is this a decent price? can i get them anywhere in Melb?
|
||
| Top | |
||
| ovo616 |
|
|||
|
superplus in hallam sell the ford rocket covers
|
|||
| Top | |
|||
| znipa-x |
|
|||
|
I just ordered a set of the EFI Cobra covers from Summit $149.95US, just under AUD$200, even with postage they are cheaper than I could find in Oz.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| Ricker |
|
|||
Age: 47 Posts: 14 Joined: 8th Aug 2006 Ride: XY GS 351 & EL II Fairmont Ghia Location: Lismore |
Do them Cobra covers fit alright on a 5.0 with GT40-X heads?
_________________ ALL HAIL KING BOOKAH
|
|||
| Top | |
|||
| richie |
|
||
|
matter of interest - you may need truck ones so oil filler is on passenger side. I had clearance issue for filler tube using Edelbrock Performer 5.0 manifold even with spacer. try http://www.fordracingparts.com/parts/pa ... Field=6240
Richie
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| veeate |
|
|||
|
yeah, like wise... the oil filler on my standard rocker covers was hitting the upper manifold on the Performer, so i put some chrome ones on there....
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
