|
jagga |
|
||
|
hey guys just wondering how i would get the upper intake manifold off of the motor... as far as i can tell i have undone eberything. but it is still on preety firm... should i try leavering it with a lever bar orrrrrr. i dnt wanna brake my buitiful motor... please help... i need to get to the injector plugs under it... as im having them spliced to suit ef injector loom...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
fairy v8 |
|
||
|
just the 4 bolts in the middle under the 5000l v8 plate and 2 at each end could be stuck tight on gaskets give it a tap with rubber hammer or block of wood etc ,theres a few vacumn hoses underneath to undo
|
||
Top | |
TerroristGHIA |
|
|||
|
Also there is a bolt right at the back, near the firewall, it can be a b**ch to get in an EF, so i would assume it is the same in the AU
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
jagga |
|
||
|
hey thanks guys. i hadnt udone the ones under that cover... cheers... all is now good. thanks heaps...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
Tezza393 |
|
|||
|
Hey jagga, how far away you think you are from burning up the streets?, let me know, i wanna see this baby crawl
hahahaha
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
Top | |
jagga |
|
||
|
hey imk still on trak for maybe late feb... im changing a few things. whilst im playing with it. like explorers to cobra intakes etc etc... justr wiring is being a b**ch
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
Tezza393 |
|
|||
|
Sweeet, i cant wait
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
Top | |
jagga |
|
||
|
believe me niether can i. but if i want it done propper i gotta take my time with it and check double check and triple check stuff. also i think i have a bit of custom stuff to have done yed. acc lines. fuel lines. mount for the oil cooler. power steering lines... etc etc... if any one in adelaide is good with this sorta thing give me a hoy coz i need all the help i can get... im a newby doin a big job... lol its all good experience tho ...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
Tezza393 |
|
|||
|
its been a while jagga since your last update,
whats going on? anything new to post?
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
Top | |
jagga |
|
||
|
ok so im nearly there. was hoping to have her done by end of feb. but due to working at a winery. vintage has kicked in early and is punishing me a bit. as far as time goes.
but here is where im at. i have purchased new EV6 injectorplugs to suit rather than my dodgy wiring job i was thinking of doing. i will have them spliced on top my old injector loom. im trading the EDIS setup with terrorist ghia. so i will have better crank balencer etc... all front end acc are changed over minus balencer.... waiting on my BBK 75mm throttlebody to rock up from bpt motorsport. then i will put the intake manifold back on and send it to adelaide to be dyno tuned... also waiting on a responce from choco as to whether i can trade my old box with 3.73 gears... getting so close... i cant wait to hear it idle... vroom vroonm...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 36 guests |