|
| Private9 |
|
|||
|
Hi All,
Sorry for the silly question, but do I need some sort of adapter to put a pod on an EB 5lt? Also, will a 3" pod fit? Thanks, Justin. |
|||
| Top | |
|||
| xhxrsix |
|
|||
|
i put one on my ef, used a piece off a 6cyl airbox (where the intake pipe bolts to airbox) like reversed that bit and bolted it to the maf, then a pod on the end.
i think mine is a 3'' one...
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| Private9 |
|
|||
|
Sweet, thanks mate!
Get a decent noise out of it? |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i got one on my EB 6. i know it's a six but the induction noise i got sounds unreal.
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| xhxrsix |
|
|||
|
sounded a little better... but its hard to hear now cos i took the tailpipe off so its dumped at the diff lol.
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| Private9 |
|
|||
|
{USERNAME} wrote: sounded a little better... but its hard to hear now cos i took the tailpipe off so its dumped at the diff lol.
haha, you and I think alike! Mine's flanged just before the diff so I'll be unbolting it this weekend. Gotta love dodgy mods! |
|||
| Top | |
|||
| Stevo |
|
|||
|
I just got one of those plastic adapters from autobarn
|
|||
| Top | |
|||
| Ben_Daui |
|
|||
|
is there any difference in performance when using a POD compared to the K & N panel filter?
_________________ MEMBER 1390 |
|||
| Top | |
|||
| Private9 |
|
|||
|
{USERNAME} wrote: is there any difference in performance when using a POD compared to the K & N panel filter?
I would expect the pod to be a bit doughier in traffic situations unless it's shielded, which I'm sure as hell not doing. |
|||
| Top | |
|||
| xhxrsix |
|
|||
|
lol, i put the tailpipe back on tonight... it has a twin 2inch system but it sounded a little too wierd with no tailpipe.
also put a bigger maf off an au on, that combined with the pod has made the induction sound abit better.
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| Private9 |
|
|||
|
{USERNAME} wrote: lol, i put the tailpipe back on tonight... it has a twin 2inch system but it sounded a little too wierd with no tailpipe.
also put a bigger maf off an au on, that combined with the pod has made the induction sound abit better. Spewin! What sorta weirdness was happening with the sound? AU maf sounds good, pity I just sold mine. |
|||
| Top | |
|||
| spiro89 |
|
||
|
my eb xr8 was crap with a pod tryed to stall at idle when cold and used fuel gone back to airbox and all problems fixed
|
||
| Top | |
||
| xhxrsix |
|
|||
|
did you leave the maf on when it had a pod? something isn't right it shouldn't do that...
it sounded ok with no tailpipe under acceleration, but was a little loud when cruising or light throttle. its too quiet with a tailpipe tho 
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| Burns |
|
|||
Age: 35 Posts: 540 Joined: 9th Aug 2007 Ride: FG Ute, ED XR8 Sprint, GPZ900R Location: Leopold, Geelong |
just make a bracket up with some aluminium, stainless nuts and bolts and a tig welder. looks heaps better and u know it wont bend or break. I went from having a k&n panel filter with cold air intake to unboxed k&n pod filter. I noticed no gains or losses in power but noticed more suction noise. I left it unboxed and unshielded purely becuase i like the look of them. If you like i can post some pics of my setup
_________________ The Past: EF Fairmont, EL Fairmont 5.0, HR Special, NF Fairlane 5.0, GSX 250-F, BA II XR8, VS3 Ute, VS2 L67 Calais |
|||
| Top | |
|||
| Private9 |
|
|||
|
{USERNAME} wrote: i put one on my ef, used a piece off a 6cyl airbox (where the intake pipe bolts to airbox) like reversed that bit and bolted it to the maf, then a pod on the end.
i think mine is a 3'' one... Thanks for the tip mate, did that exact thing today, worked perfectly. Tip for anyone who cares, don't use an AU one as the inlet is tiny. Ended up swapping it for an EF one. Kev also chopped the res out for me today, now it's starting to sound a little like an 8. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
