Hi Guys,

Just wondering if this is a ford MAF?

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=011

Thanks

If the seller cant say what it's off then probably best to stay away.

Well i got it on the off chance it was
The electrics side is exactly the same - exept the plug, and the outta casing very similar numbers etc etc
Just wondering if i could take the electrics off my old maf and put it on this one?

looks like a maf from a auv8 your electronics will go on

Greg

It wont fit

ive found the two types of plugs

http://cgi.ebay.com/ebaymotors/94-95-Mu ... 06.c0.m245

Thats the plug i have

http://cgi.ebay.com/ebaymotors/FORD-RAC ... 8800727180

Thats the plug on the MAF i bought

yes i see the difference unbolt the sensor from your old maf then screw it onto the new maf

greg

Will that muck up the calculations because its going from 50odd cm to 75cm?

Yes it does but in this case it actually works quite well. You end up with a performance favourable lower load calculation and a slightly leaner mixture. It is worth checking your air/fuel on a dyno though and make sure you get no detonation as a result of the lower load calcs. Be sure your fuel and ignition systems are up to scratch.
The sizes are; 55mm stock HO and the one you have is 70mm and it does look like an actual AU MAF in those pics. I also clicked on the one he calls "genuine EB-EL MAF".....the electronics shown in his picture are NOT genuine. Genuine ones actually have FORD moulded into the electronics housing.