Hey guys,
Im looking at buying a cam for my ef xr8 and just want to ask u guys what you thought would be best.
At the moment its standard with 3"zorst, extractors but it is running a 100Hp approximate Nitrous shot.
Where sould i be looking for a decent lumpy cam? how much?
and i spose i ask how hard is it on the 8's to change the cam?
cheers fellas

Hi changing a cam on a v8 is a small mission as for find a cam go to the WADE CAMS web sit and have a look and they have a page where you can list all your engine mods and they will find you the right cam.......

cheers dude, will do.... if i was going to do the cam though i spose i would want to upgrade head and intake manifold also aye. Anyone do a nice package?

Go the WADE!!!!

Changing the cam without changing anything else is a bit of a waste at the stage you're at nitroxr.
When you consider your heads and intake are the biggest corks in the system. If you don't want to change those pieces yet you should consider some of the basics like;
65mm t-body
Cold air kit
Underdrive pulleys

The stock cam is actually quite good and an easy way to up the performance is to use 1.7 roller rockers. The Ford Racing Cobra 1.7 bolt on rockers are just the shot. These, like the U/D pulleys will pick up the torque and hp right across the rev range.

Pete.