|
| Tezza393 |
|
|||
|
Hey all
i want to do a manual conversion to my NL but my problem is that the EL manual conversions are few and far between This idea might be dumb but can i use an eb - el kit to make things easier as far as i know the yokes are different? but since id have to get my tailshaft custom'd would it really matter if u use an eb yoke and the nl one on the diff? if i missed somethin dont be shy to slap me and set me straight cheers
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| ELGT |
|
|||
|
Mate, your yoke & shaft will work, a pedal from XC through EL and a Mal Wood pin kit will make it easy. Dont forget to get the spring that holds the clutch pedal back toward the floor either.
|
|||
| Top | |
|||
| Bsjenko |
|
|||
|
I am in the same boat.... been offered a t5 conversion kit, but not 100% sure what i will need. This is what is in kit. (from a EB)
new clutch pbr rpm flywheel and bolts t5 eb v8 manual ecu ( prob will need a diff one???) spiget bearing, brand new shortend shifter cluthc cable yoke eb pedal box ( prob need el one???) What else would i need? Bloke wants to sell for around $1500-$1600 i think, reasonable price?? cheers BEN
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| trevfrombaysy |
|
||
|
i put an au box into my eb sedan and it was very straight forward . i had to have the tail shaft shortened and they couldnt do that to the alloy one apparently so had to get a steel shaft and then shorten that same ecu no worries there worst part is replacing the pedal box. all in all well worth the effort heaps more fun toi drive.
|
||
| Top | |
||
| mitchg911 |
|
|||
|
{USERNAME} wrote: I am in the same boat.... been offered a t5 conversion kit, but not 100% sure what i will need. This is what is in kit. (from a EB)
new clutch pbr rpm flywheel and bolts t5 eb v8 manual ecu ( prob will need a diff one???) spiget bearing, brand new shortend shifter cluthc cable yoke eb pedal box ( prob need el one???) What else would i need? Bloke wants to sell for around $1500-$1600 i think, reasonable price?? cheers BEN assuming the box is in good condition 1500 is a steal. Fordpro wants $2500 for a convo with no ecu.. if it were me id jump on it... -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| One Drone |
|
|||
|
I am getting a T5 next month through Mal Wood. That is at $4100. If you guys can find it any cheaper than that then you're laughing.
 Of course, at that price you get everything. Inc. Oil
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| greg302 |
|
||
|
see cheap cheap lol
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
