|
| prydey |
|
|||
|
i thought stock t/b's were 58mm. either way a au one will be an upgrade.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| themoose |
|
||
|
{USERNAME} wrote: i dont know why gt40p's are gettin such a good wrap they are only one step above e7's.
I have just test driven an au 3 xr8 and yes it felt faster than my eb stock but with the diff change i use to stick with em, now tho the power compared to my xr8 id def leave the au behind. Bang for buck id look at supercharging. Unless you plan on spending a crap load of money realy modifing thes motors id say dont bother they are to breathless.. The only reason for my intake mods is just to make the car more drivable and make the most of what i have! My XB FAIRMONT will be be fitted with CHI 3V heads roller cam 408 bottom end etc to the tune of around 550-600HP so i dont need a bananas car for work and back, but i will be needing my licence! |
||
| Top | |
||
| falcon gl |
|
||
|
the one quoted earlier, thats on ebay is not a 5.0 one its a 6 cylinder have a look closely the throttle is bakwards and it has ics that sixes have
|
||
| Top | |
||
| themoose |
|
||
|
{USERNAME} wrote: i thought stock t/b's were 58mm. either way a au one will be an upgrade.
sorry i measured it with my kids ruler at night! The carby off my lawnmower would be an upgrade, it would just be emissions i would have dramas with! |
||
| Top | |
||
| XR9UTE |
|
||
|
Listen to scaffy.....Chuck the TFS intake and get a Cobra or Explorer or Edelbrock performer intake and 65 t-body.
Bump your base timing to 32-33 degrees and adjust your tPS to 0.98 volts. |
||
| Top | |
||
| themoose |
|
||
|
Far king oath its in the process as we speak! as for timing tips thank you and thanks for everyones tips and info!
explorer intake sys, dunny door cats and a twin2 1/4 exhaust system! next up EDXR8 front grill an lights! |
||
| Top | |
||
| jaysway |
|
|||
|
{USERNAME} wrote: Listen to scaffy.....Chuck the TFS intake and get a Cobra or Explorer or Edelbrock performer intake and 65 t-body.
Bump your base timing to 32-33 degrees and adjust your tPS to 0.98 volts. what volts does the standard tps run at? |
|||
| Top | |
|||
| XR9UTE |
|
||
|
It varies anything from 0.6-0.8 usually.
|
||
| Top | |
||
| TUF250 |
|
||
|
what is the benifit of changing the voltage? (excuse the noob question)
do the au TBs bolt on without mods? |
||
| Top | |
||
| XR9UTE |
|
||
|
check the sticky at the top of this forum.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
