Fordmods Logo

Home » Forums » Fordmods Tech » V8 Workshop

Oil cooler setup 

 

Page 1 of 1 [ 10 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
milo 302
 Post subject: Oil cooler setup
Posted: Mon Jan 04, 2010 5:45 pm 
Tyre Shredder
Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia
Does anyone have any pics of the factory oil cooler setup on the 220kw, how the lines leave the block.
Cheers milo
Top
 Profile  
 
 
XH5LWEPN
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 04, 2010 10:54 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia
I dont think i've got any pics from when i fitted the 220kw motor with oil cooler to the missus car.
But i can tell you that the lines run from, and back to, a sandwich plate located between the oil filter and block.
Having the sandwich plate in there which is about an inch thick, means that you have to then use the shorter Z89A oil filter instead of the Z9.

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!
Top
 Profile  
 
 
XH5LWEPN
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 04, 2010 11:00 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia
Here ya go.
Heres a pic of my mates AUII 220kw Motor that we pulled out for a build.
This clearly shows the oil cooler sandwich plate.

Image

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!
Top
 Profile  
 
 
milo 302
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 04, 2010 11:14 pm 
Tyre Shredder
Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia
Ahh thats how they did it, thats awesome man.
thanks for taking the time out to chuck up that pic, muchly appreciated
Cheers Milo
Top
 Profile  
 
 
XH5LWEPN
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 04, 2010 11:17 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia
No worries mate.
Do you work at XFT?

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!
Top
 Profile  
 
 
milo 302
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 04, 2010 11:28 pm 
Tyre Shredder
Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia
Nah ive met simon before though :?
Top
 Profile  
 
 
TKFD
 Post subject: Re: Oil cooler setup
Posted: Sat Jan 16, 2010 10:21 pm 
Stock as a Rock
Offline

Age: 55

Posts: 150

Joined: 6th Nov 2009

Ride: AU2 XR8

Location: waroona
WA, Australia
the K&N oil filters are supposed to be good. they make to fit shorter oil cooler types
Top
 Profile  
 
 
XH5LWEPN
 Post subject: Re: Oil cooler setup
Posted: Sun Jan 17, 2010 4:50 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia
{USERNAME} wrote:
the K&N oil filters are supposed to be good. they make to fit shorter oil cooler types


Thats right.
Cant remember part number though.
Got one on the missus car now with the oil cooler sandwich plate aswell.

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!
Top
 Profile  
 
 
TKFD
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 18, 2010 10:55 pm 
Stock as a Rock
Offline

Age: 55

Posts: 150

Joined: 6th Nov 2009

Ride: AU2 XR8

Location: waroona
WA, Australia
HP-1009.

And they come with the easy fitting wrench/nut. Easy to strip though, so careful :(
Top
 Profile  
 
 
XH5LWEPN
 Post subject: Re: Oil cooler setup
Posted: Mon Jan 18, 2010 11:04 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia
{USERNAME} wrote:
HP-1009.

And they come with the easy fitting wrench/nut. Easy to strip though, so careful :(


Fvck man, to strip that nut on the end of the filter, it would have had to have been WAY too tight, lol.

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 10 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » V8 Workshop

Who is online

Users browsing this forum: Google Adsense [Bot] and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 27, 2024 3:06 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names