|
| BuNtEr |
|
||
|
was thinking would it be better to remove the air box and replace it with a pod filter Or just leave it as is
_________________ BANNED |
||
| Top | |
||
| XH5LWEPN |
|
|||
|
Leave it as it is!!!
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| smiley235 |
|
|||
|
leave as is, get a panel filter.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| john_jay |
|
|||
|
i fitted a pod filter inside my air box and he first thing i noticed is improved throttle response and revving better on WOT. definitely heaps better that stock. mine is a v8. dont know if you get the same improvement on I6.
_________________ can't aFORD lately |
|||
| Top | |
|||
| Damo |
|
|||
|
could this topic be covered any more times. Try doing a search next time BuTneR.
|
|||
| Top | |
|||
| Fordpwr |
|
|||
|
{USERNAME} wrote: could this topic be covered any more times. Try doing a search next time BuTneR. Who cares really each case maybe a bit different from the other, and theres always new news on different performance mods... for example my bf xr8 which had a panel filter, now has a pod with ram air supply. custom made by my imagination and its great the CFM has increased thus giving me more throttle response and more mileage fondly enough 
_________________ 2006 BF XR8 VORTECH @ 6psi w/m injec 350rkws |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I'm interested to know what it takes to put the pod inside the airbox... I thought about getting a pod, but don't want it sucking hot air. If I put it inside the airbox then feed cold air from the bottom as well as stock induction, I think it could be beneficial?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Tezza Bear |
|
|||
|
i brought a $3 pvc elbow from bunnings & a airpod adaptor & mounted mine in the box & cut a 3"hole through bottom of box & got more pvc & ran it to front near bumper it seems to have worked well . i have felt a little increase in performance .
_________________
|
|||
| Top | |
|||
| Vic |
|
|||
|
There've been a few punters who have added a second intake into the bottom of the airbox from the front bar and had good results - you just have to add some protective mesh to stop serious stones from getting up there depending on your design.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| TROYMAN |
|
||||||
|
hii
when i had my xr8 i tried the pod without the box it went ok but once the engine bay would heat up in traffic the idle would hunt slightly so i put a k&n panel filter the went much better but didnt have that induction noise. ive got the pod in the airbox in my 6. with the home made cai made from a old au snorkle and two 2" flexable hoses and it works great. just to see. when i put the std filter on and went for a run the car was lacking a little top end pull compared to the pod in the box..
|
||||||
| Top | |
||||||
| Scaffy |
|
|||
|
Is the airbox in the 6 and 8 the same?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: Is the airbox in the 6 and 8 the same?
from ef onwards has the same airbox as the 8 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
