|
| blueprinted |
|
|||
|
who has used procomp heads
they are a copie of edelbrock victor jr's and seem to flow well and only cost $1650 a set complete are there any issues with these heads? |
|||
| Top | |
|||
| xr8ute |
|
||
|
I have heard they need a reasonable amount of machine work before you can bolt them on. i.e. they dont work real well with std manifold locations and so on. All that machine work costs $$$, so at the end of the day, they are not as cheap as the seem...
I've never seen a set in real life, but there is a massive thread on these heads in the Windsor forums on corral.net, http://www.corral.net/forums/showthread ... ht=procomp If you are on tight budget, I think a set of iron ProTopline/RHS heads would be the way to go. Last edited by xr8ute on Thu Sep 28, 2006 3:46 pm, edited 1 time in total. |
||
| Top | |
||
| blueprinted |
|
|||
|
MY BROTHER JUST TOOK DELIVERY OF A SET
I'LL TAKE SOME PICS HE SAYS THEY ARE MACHINED VERY WELL AND ALMOST LOOK LIKE POLISHED PORTS COST HIM UNDER $1600 COMPLETE WHERE AS NEW GT40P'S ARE $1250 |
|||
| Top | |
|||
| xcabbi |
|
||
|
{USERNAME} wrote: I have heard they need a reasonable amount of machine work before you can bolt them on. i.e. they dont work real well with std manifold locations and so on. All that machine work costs $$$, so at the end of the day, they are not as cheap as the seem...
I've never seen a set in real life, but there is a massive thread on these heads in the Windsor forums on corral.net, http://www.corral.net/forums/showthread ... ht=procomp If you are on tight budget, I think a set of iron ProTopline/RHS heads would be the way to go. Whilst on the subject of pro topline heads rather then pro comp's. I've read a few articles written by people that reckon the pro topline head is the best bang for buck windsor head, period. |
||
| Top | |
||
| Walker |
|
|||
|
Your brother spends money on heads, yet skimps on a roller cam?
|
|||
| Top | |
|||
| TickXR |
|
|||
|
i've just bought a set of top line heads and will have here in few days so will post some pics up when i get em
top line heads benefit GREATLY from a little bowl work, an extra 35-40hp can be found here alone These heads flow in vicinity of 420-430 straight out the box and easily flow over 500 with some work
_________________ If you don't do it whilst your livin, you aint got no bloody chance when your dead!!! |
|||
| Top | |
|||
| greg302 |
|
||||
|
heres my set if the pic worked
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||||
| Top | |
||||
| Jaysen |
|
|||
|
nice heads mate, have you got a pic of the chambers and looking down the intake ports?
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| greg302 |
|
|||||
|
sure do mate
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
|||||
| Top | |
|||||
| blueprinted |
|
|||
|
yeah alloy head and a hyd non roller cam!! i don't get it either
but i had a look at the heads and they have polished ports there are no machine marks anywhere to be seen they acutally look very good and the flow sheet he got with them states they flow 500hp on the inlet side at .700 lift but his cam only has .498 |
|||
| Top | |
|||
| Big Kev |
|
|||
|
wow there some really nice look heads mate how good do new ones look...looks smick
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| greg302 |
|
||
|
yer there the pro topline. not pro comp
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| blueprinted |
|
|||
|
how much did the pro toplines iron heads cost and where do u get them
|
|||
| Top | |
|||
| greg302 |
|
||
|
1100 a bare set.
http://www.performancewholesale.com.au/ Greg
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: sure do mate i am curious about your ccs in head chamber,can you check one? and post size,thanks
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 29 guests |
