|
| green car |
|
||
|
Who knows of the fastest quarter mile time from a totally stock internally 5.0,including all the ho gear in an eb-el falcon,fairmont.
Just wondering how much i could squeeze out of my 5.0 ho before having to change manifolds and heads,maf,tb etc. Naturally aspirated
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| BOTTLEDUP |
|
|||
|
Gut the thing Shannon!!!
And get Pete to drive it, that'll cut off a few tenths. 
Honestly though I don't know what the fastest 'unopened' HO time would be, its not something a lot of people would attempt I guess, but I know there are guys in the US making over 250rwhp from E7 heads and HO manifolds (albeit ported and with camshafts changes)
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| green car |
|
||
|
Haha petes tune ups.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| low_ryda |
|
|||
|
since when did gtho's come in pov pack small blocks ? the only hO is a clevO!
i feel somewhat disapointed now.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
{USERNAME} wrote: since when did gtho's come in pov pack small blocks ? the only hO is a clevO!
i feel somewhat disapointed now. Thanks for your enlightened response. I feel a lot smarter now. The HO refers to the 'High Output' 5.0L which was fitted to the EB-EL1 Falcons, with a whopping 165kw.
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| schnoods |
|
|||
|
Haha High output my a***.
I reckon it'd be Kilma's Green ef XR8, though he has airpump feeding the motor.
I know scaffy's ran a couple of 14's with the HO Gear and tuned with a tweecer, if i remember correctly was about 211 rwhp, had underdrives, exhaust but everything below the rockers down was standard.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| millard455 |
|
|||
|
{USERNAME} wrote: Haha High output my a***.
I reckon it'd be Kilma's Green ef XR8, though he has airpump feeding the motor. I know scaffy's ran a couple of 14's with the HO Gear and tuned with a tweecer, if i remember correctly was about 211 rwhp, had underdrives, exhaust but everything below the rockers down was standard. lol, i was going to say kilma aswell.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Remember he said N/A.
Personally i think it would be possible to get a N/A EB 5.0 running E7's and HO manifold to run a 13.9. Obviously firstly with a well built driveline. Built and shift kitted auto, hi-stall short diff gears and a nice tight LSD. Some DOT radials aswell. The E7 heads would have to be as heavily ported as possible same goes for the HO manifold. Shave heads for max possible compression. Cam is up to the critics. Some may say standard cam has to stay, if so 1.7 rockers would be a must. Other may say a cam change is allowed, if so something fairly mild like the E-303 would be the go i reckon, 1.6's or 1.7's will obviously depend on P/V clearance. T/B would be 65mm, MAF 70mm, decent flowing intake set-up pre-maf and between MAF and T/B. 24lb injectors and a tune to suit. Surely a tune is allowed. All the other things like decent headers, exhaust and underdrives etc are a no brainer. Obviously make sure everything else is healthy, ignition, cooling, fuel system etc. Last of all some lightweight work to the body of the car and i think we'd almost have ourselves a potential 13 sec HO equipped E-series. IMO the cost of doing all this may not be worth it with re-using the E7's etc, but if all the work can be done yourself includng the porting and you can pick up the goodies for cheap it could well give good bang for your buck. Shannon, are you putting your hand up?  I have some E7 heads and a HO manifold you can attack with the die grinder
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: since when did gtho's come in pov pack small blocks ? the only hO is a clevO!
i feel somewhat disapointed now. the clevo IS a small block. try some research in advance
|
||
| Top | |
||
| schnoods |
|
|||
|
{USERNAME} wrote: Remember he said N/A.
Personally i think it would be possible to get a N/A EB 5.0 running E7's and HO manifold to run a 13.9. Obviously firstly with a well built driveline. Built and shift kitted auto, hi-stall short diff gears and a nice tight LSD. Some DOT radials aswell. The E7 heads would have to be as heavily ported as possible same goes for the HO manifold. Shave heads for max possible compression. Cam is up to the critics. Some may say standard cam has to stay, if so 1.7 rockers would be a must. Other may say a cam change is allowed, if so something fairly mild like the E-303 would be the go i reckon, 1.6's or 1.7's will obviously depend on P/V clearance. T/B would be 65mm, MAF 70mm, decent flowing intake set-up pre-maf and between MAF and T/B. 24lb injectors and a tune to suit. Surely a tune is allowed. All the other things like decent headers, exhaust and underdrives etc are a no brainer. Obviously make sure everything else is healthy, ignition, cooling, fuel system etc. Last of all some lightweight work to the body of the car and i think we'd almost have ourselves a potential 13 sec HO equipped E-series. IMO the cost of doing all this may not be worth it with re-using the E7's etc, but if all the work can be done yourself includng the porting and you can pick up the goodies for cheap it could well give good bang for your buck. Shannon, are you putting your hand up? I have some E7 heads and a HO manifold you can attack with the die grinder Yes but head porting is no longer Unopened? I always thought (considering the ls1 crowd and Ba/bf) that anything under the rocker covers is part of the motor, only valve springs, oil pump gears and the rest is all not allowed to be touched as it is then opened. No doubt the with a properly set up car with 4.11 good tune, high stall , exhaust and a shelled out car, a 13 could be seen.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| Tom Davey |
|
||
|
`Unopened`. `Porting`. `Shaved Heads`. Which word doesnt belong?. Pick me Miss!!!!.
_________________ XC GXL 5.8: 14.1 @ 99MPH. Thank you to Jimbos alchoholic uncle for the short motor. It goes alright now mate. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
I ran a 13.9 on a dead stock motor, stock heads, cam, exhaust, auto fairmont, stock 3.45 diff. I did however use a lot of NOS and it was a dry setup. Hell i went 13.3 at 105 on E7's
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| green car |
|
||
|
Well ive just realized that ive cheated by having 1.72 street terras, so that idea has gone to s**t haha
It is hard trying to polish a turd, a turd that is the stock 165kw ho 
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| schnoods |
|
|||
|
Haha, well at least you are going faster , thats the main thing.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Quote: `Unopened`. `Porting`. `Shaved Heads`. Which word doesnt belong?. Pick me Miss!!!!.
Well F$#* me, let me make this clear to you. "It would be possible to run 13.9 using a naturally aspirated 5.0 EB with HO manifold and E7 heads" Yes the thread is titled unopened but nowhere in my post did i say unopened.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
