|
XR9UTE |
|
||
|
{USERNAME} wrote: so in the 5.6 the T/B is an 82mm is this an overkill??
In that case the engine capacity is large enough to build torque without the need for increased runner length. Hence the large open plenum design which relies on the large t-body to keep the plenum supplied with enough air to make good power. |
||
Top | |
stavros68 |
|
||
|
thanks for the info just about to put a 5.6 soon ,debating what size TB to put 75mm or 80mm
|
||
Top | |
Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
I've given in. The cars booked in to see if the 65mm tb is going to give me abit more power. So in just under 2 weeks i'll find out.
|
|||
Top | |
Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
Cars back from the shop with the 75mm still on it. 65mm made 1.6rwkw more but lost power earlier and sharper than the 75mm. At 153kmh the 65mm was down to 135rwkw were the 75mm was at 143rwkw. Maybe my motor is still getting to much air regardless of tb size. Also there was only a 2kw difference between pod in the box and no intake piping/filter at all.
|
|||
Top | |
XR9UTE |
|
||
|
{USERNAME} wrote: Cars back from the shop with the 75mm still on it. 65mm made 1.6rwkw more but lost power earlier and sharper than the 75mm. At 153kmh the 65mm was down to 135rwkw were the 75mm was at 143rwkw. Maybe my motor is still getting to much air regardless of tb size. Also there was only a 2kw difference between pod in the box and no intake piping/filter at all.
What about averages? Lets see the two dyno graphs laid over each other with the torque curves shown. Then I'd like to see 1/4 mile times with the two different t-bodies. |
||
Top | |
junior |
|
||
|
So, XR9Ute, based on your earlier post what size throttle body would you recommend for the following package: Ford Racing 342 stroker crate long engine being fitted into an AU3 XR8 auto using the AU3 upper and lower inlet, standard injectors, Tri-Y headers, flash tuner with custom tune. The engine comes with aluminium GT40X heads, X303 cam with 1.6 roller rockers, 10:1 compression. I was going to use the standard 70mm throttle body but maybe I need to look at a 75mm unit, what do you think?
Any estimates on power? When set up in the US running carby etc, Ford Racing estimate 375-385hp flywheel. |
||
Top | |
XR9UTE |
|
||
|
Purely because it's a 342 I think you could use a 75. But I'd like to see a better intake like an RPM-II on that engine.
Pete. |
||
Top | |
junior |
|
||
|
Thanks for that Pete. The guys budget is stretching hence retaining the standard intake but that might be something I can talk him into later on (when his budget allows). I'll let you know the power and torque figures when we're done (in about 3 or 4 weeks).
|
||
Top | |
Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
I'm not going to try and get any more power out of this set up. Will stay as is untill its rebuilt in 5 to 8 months. After 62 dyno runs and 210000km i think this is the best it will do. Should have alot more potential when it's rebuilt as a 312.
|
|||
Top | |
fairy v8 |
|
||
|
another thing to factor into going too big a TB is you loose small throttle openings driveability ....because as soon as you crack the throttle open it gets a considerably larger gulp of air, which is hard to compensate for....so itdrives like a pig roundtown to gain 2kw top end ???
|
||
Top | |
Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
Car drive's no different around town then when it was stock, uses less fuel and its not sluggish when you put your foot down.
|
|||
Top | |
fairy v8 |
|
||
|
well in theory you would think that it would be the case as you want precision control at small throttle openings and the more gradual you increase the airflow the smoother the transmission of power......oh well ,maybe ive got it wrong
|
||
Top | |
Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
Megasquirt looks after all that. It knows the difference between full throttle and city driving.
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 22 guests |