|
| XFWAGON |
|
|||
|
I also couldn't get the factory E series rails to work with the Track Heat, no way was it going to work.
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: You will also need USA fuel rails Why ?? Tmk the EFI is on the lower section.. TFS street heat didn't work with E or A series rails, nor did standard HO 5.0. Perhaps track heat is higher in the critical area or are you running a phenolic spacer? Interesting you got standard Aussie rails to work with TFS track heat lower which I understand is the same as street heat lower. I tried but gave up after grinding away so much alloy that I hit the mounting hole. This was after bending the front cross-over. The rail still didn't fit the lower but was close enough to fit the upper. This was when I found it fouled the FPR. I used the std rails with extended cross over hoses.. Yes I originally ground some inlet away and removed heat shield tube... I have custom 18mm rails now...FPR is now at the front between the two fuel rails.. From memory I had to bend reg for clearance... I didn't require an angle grinder, hammer etc but came close LOL...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| jagga |
|
||
|
Cheers for ya help guys. Ill check back with yas in a month or so when i get home and fiddle with it.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| jagga |
|
||
|
Jist an uptade guys. Heads are well on thier way after a bit of a delay. Just ordered my intakes and cam. Fox body loom coming soon intercooler orders just getting some custom piping made up. Parts list so far.
Raptor pro street charger.(9psi pulley) when tim gets home F303 cam. Trickflow 1.7 allor rockers Trickflow twisted wedge 170 heads. Track heat upper and lower manifolds. Plazma man bar and fin cooler with custom piping etc. Acufab 75mm tb Looking for about 47lb injectors Looking for a good maf to suit. And waiting till next pay to get my gear box and conversion from mal wood. Magnum t56. And conversion gear. Hopefully she should breath fire.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| jagga |
|
||
|
Jist an uptade guys. Heads are well on thier way after a bit of a delay. Just ordered my intakes and cam. Fox body loom coming soon intercooler orders just getting some custom piping made up. Parts list so far.
Raptor pro street charger.(9psi pulley) when tim gets home F303 cam. Trickflow 1.7 allor rockers Trickflow twisted wedge 170 heads. Track heat upper and lower manifolds. Plazma man bar and fin cooler with custom piping etc. Acufab 75mm tb Looking for about 47lb injectors Looking for a good maf to suit. And waiting till next pay to get my gear box and conversion from mal wood. Magnum t56. And conversion gear. Hopefully she should breath fire.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
