hi all been a long time since ive been on here i no longer own my au forte i now have a au v8 fairlane giah im wanting to start stocking go fast parts for an engine rebuild cam up i plan on gathering parts where and when i can over a couple of years so when my loans payed out i can take a new one to get her smick im after advise i heard certan cams need certen rods an pistons also lifters throttle body ect so im pretty well after a parts list also want to know if car will run on gas once worked i have a mate with a worked xb 351 says its too modded to run on gas but hopeing comp tune will let it work

Check TFS, Holley Systemax induction systems.Or AFR heads with Edelbrock RPM2 inet etc..
Holley, Edelbrock and TFS have cam with there whole induction system..
A 351 can be stroked quite cheap with JUST crank and 5.0 pistons..
These make good street engine with massive torque..
Depending an rods and pistons can make serious power!!!
For a std block...

Check TFS, Holley Systemax induction systems.Or AFR heads with Edelbrock RPM2 inet etc..
Holley, Edelbrock and TFS have cam with there whole induction system..
A 351 can be stroked quite cheap with JUST crank and 5.0 pistons..
These make good street engine with massive torque..
Depending an rods and pistons can make serious power!!!
For a std block...

http://www.summitracing.com/parts/TFS-K514-360350B/

http://www.summitracing.com/parts/HLY-300-501-1/

http://www.edelbrock.com/automotive_new ... ages.shtml

Stroker 351 kits..
http://www.coasthigh.com/Ford-351-Winds ... s/1306.htm