|
TUF250 |
|
||
|
just bought some new bits for my 5 litre NC, rotor/dizzy cap/plugs.
the book recommends a 1.4mm gap for these motors, is that true or have people found that a different gap works better. running petrol only no LPG. also if i change these things and the air filter fuel filter etc. what sort of economy might i expect to see in around town driving out of these engines? still getting it rwc so havnt drivin it yet |
||
Top | |
Scaffy |
|
|||
|
My plugs are gapped to about .040, or 1mm, but they're not the standard plugs.
Fuel economy will be governed by your right foot. Around town though, you'd probably be looking at 14-15 l/100km
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
Top | |
nannas_ed |
|
|||
|
yeh i gap mine at 1mm with no problems and they are the standard ngk's
_________________ |
|||
Top | |
Timmeh |
|
||
|
I am running NGK iridiums for an AU III XR8 which is 1.4mm on my EL XR8.
|
||
Top | |
green car |
|
||
|
When i ran stock plugs a 1.1 mm gap was good.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 15 guests |