|
| Thumpdaddy |
|
|||
|
Hi all
Just wondering if anyone has a billet timing gear drive (some times called noisy gears ect) on their 5l windsor? I have just purchased some from sydney speed supplies (the noisy straight cut one) and will be putting it in soon. just want to know if anyone has had any probs with knock sensors ect.........
_________________ EF XR8 option 20 police interceptor |
|||
| Top | |
|||
| banarcus |
|
|||
|
There are no knock sensors on windsors. Perhaps double check the inside of your timing cover too for possible fouling.
|
|||
| Top | |
|||
| Thumpdaddy |
|
|||
|
oh ok thanx
 I didnt know that. Ive only had my XR8 for a few months and only had sixes before that.
On most of the websites I've looked at it said that it may require some machining of the timing cover on some applications but I don't know if the windsor needs it or not.......
_________________ EF XR8 option 20 police interceptor |
|||
| Top | |
|||
| Jaysen |
|
|||
|
How much did you pay for them out of interest? SSS tend to have stuff fairly cheap.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| Thumpdaddy |
|
|||
|
$125 on my REPCO staff discount
_________________ EF XR8 option 20 police interceptor |
|||
| Top | |
|||
| Clevo_Tech |
|
|||
|
sydney speed = procomp = cheap nasty s**t. have a backup set of gears ready within 24 hours
_________________ XD Fairmont Ghia
|
|||
| Top | |
|||
| Thumpdaddy |
|
|||
|
really??????? have you had trouble with them personally???
_________________ EF XR8 option 20 police interceptor |
|||
| Top | |
|||
| Jaysen |
|
|||
|
um a set of heads, rocker covers, flywheel and a couple of other clevo bits
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| Thumpdaddy |
|
|||
|
{USERNAME} wrote: um a set of heads, rocker covers, flywheel and a couple of other clevo bits
UM I'm lost what about em????
_________________ EF XR8 option 20 police interceptor |
|||
| Top | |
|||
| Jaysen |
|
|||
|
heads didnt come after 6 months of waiting, and the refund was just as hard to get. Others after we had this trouble also informed us of major port misalignment issues, and rocker cover issues, which is probably why the rocker covers dont fit other clevo heads, ie CHI. Rocker covers leak, dont fit properly and the die cast alloy is super brittle, I think he has even cracked one from memory from installation and removal. Engine builder refused to touch the Flywheel due to bad experiences with them, ie excessive balance issues and out of true in very short time, but we didnt test that due to already being dissapointed with other products.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| Clevo_Tech |
|
|||
|
plus more starter motor was on the car for less then 24 hours and it flogged out. i work in a autoshop ive had about 10 customers with the same if not more problems. timing cover without holes drilled and wont line up, other head problems on a chev and dizzy sparking every second cylinder . the problem also lies with poeple also brn disappointed and selling the stuf on ebay not stating its procomp thats how i got stung with a few things ask what brand they go dont know cant remember you get the box big procomp written on it. I Gave up on ebay buy all my stuff from the states www.summitracing.com i play an order like every month for s**t i love it ring a few mates see if they need anything add all together then order lol
_________________ XD Fairmont Ghia
|
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
If it is from SSS then put it in the bin now, save your money and purchase the Edelbrock unit. This is the only one which will fit an efi 5.0L with minimal modification.
HOWEVER my 0.02c do not bother with ANY gear drives for a street car.
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| Jaysen |
|
|||
|
or if you want to go back to the trusty old chain, then the Comp Cams 2138 will fit with NO modifications, and is well priced from summit. 3 keyway crank sprocket, but dont trust the timing marks, as what I found is that they are cam not crank degrees.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| 408clevo |
|
||
|
Well, it is the CAM we are degreeing in, not the crank. While its the crank sprocket that is moved, we still talk in cam dgrees usually.
_________________ XD Sedan Streeter
|
||
| Top | |
||
| Clevo_Tech |
|
|||
|
bingo
_________________ XD Fairmont Ghia
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
