|
| Bsjenko |
|
|||
|
I was talking to one of my mates today about chargeing the lane. He is fairly up to speed on engines and the such.
Anyways he reckon i shouldnt worry about changeing the heads and the manifold, and just get the supercharger...... He reckon i would be pulling around 190kw with just standard engine and the charger. Yes fair enough.... but if i did the heads and manifold (trickflow) i would be pulling say 160 or so (i hope anyways), then if i wack a charger on that i would be pulling 220-230.... yes? What would you's all do, me personally think i will stick with the manifold and heads change before the charger. As i know how restrictive they are. But opinions and suggestions please. cheers BEN
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| TwinturboBMX |
|
|||
|
I KNEW IT!
I told you to supercharge it yesterday. Id do heads and manifold first, free up a bit of power, then whack the supercharger on, no wait sorry the larger "alternator".
_________________ 17" Tezza Steelies, King F**king lows, pedders sports ryders, 2.5" cat back exhaust, pacemaker extractors, T5 manual
|
|||
| Top | |
|||
| EL XR8 |
|
|||
|
It depends on what blower you went for, but i was pulling 212rwkw on 5PSI with stock everything from a Series 1 XR8, so everything on that is restricted and s**t. Thats with a Vortech. So I would be expecting the power gains you said with a blower on stock heads and manifold...
I would've thought it isn't as necesarry to upgrade the heads and manifold as its being force fed the air they need, but of course better heads and manifold will produce gains. I'm not sure how much though, but it should be fairly noticable. If you can afford both, go for it! |
|||
| Top | |
|||
| Bsjenko |
|
|||
|
{USERNAME} wrote: I KNEW IT!
I told you to supercharge it yesterday. Id do heads and manifold first, free up a bit of power, then whack the supercharger on, no wait sorry the larger "alternator". Shuddup You 
Yeah im looking at the vortech atm. i prob would like the heads and manifold first before i did the charger. But say i put charger on first, then i change the heads and the manifold. Would i get a huge difference if i choose the trickflow setup compared to GT40 - explorer/cobra setup..... both being charged. I havent got a endless supply of cash, so would inotice a huge amount of difference in between the two head and manifold setups both supercharged? And i must say 212rwkw on 5psi stock is pretty darn good i must say.
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| EL XR8 |
|
|||
|
I honestly couldn't tell you how much of a difference changingthe heads and manifold over, but even GT40's would be a great improvement over the E7's.
Even if yours stayed stock, i would be expecting around the 220-250rwkw mark on around 8 PSI. Which is a nice mark to have some good fun 
I should be able to tell you soonish what power i get on 8-10 PSI when everything stock, as the blower is getting rebuilt. There would be a few guys on here that would know a s**t load more than i do about the heads and manifold though... Were you going to get a kit for the 'Lane or try and get the parts yourself? |
|||
| Top | |
|||
| Steady ED |
|
|||
|
Hey Dave, why don't we slap the blower on the Sprint and tell him how much more power better flowing heads and manifold make
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| EL XR8 |
|
|||
|
Hahaha, yeah no worries, you can have it one there for a week, then unbolt it all for me!
I'll need it back sometime next week! woohoo! (gotta get it rebuilt first... still!) |
|||
| Top | |
|||
| fairy v8 |
|
||
|
hey Ben if you havent read it go down to your local hi-po store and get the cartech book 5.0l ford dyno tests has all the compos ur lookin at, its about 50 bucks in NZ its awsome mate
|
||
| Top | |
||
| Kilma |
|
|||
|
On my EF with stock heads and intake, my Vortech V2 boosts up to 11psi (not intercooled, but with water injection), and I pull 221rwkw.
Its a very nice start.
_________________ The fast fun: Suzuki GSXR1000
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
Hey Kilma, what ECU are you running?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Bsjenko |
|
|||
|
{USERNAME} wrote: hey Ben if you havent read it go down to your local hi-po store and get the cartech book 5.0l ford dyno tests has all the compos ur lookin at, its about 50 bucks in NZ its awsome mate
cheers mate, i shall have a look for that one. hopefully i can find it over here.
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| pinkbits8u |
|
|||
|
BLOWN BLOWN BLOWN
build a low compression engine then BLOW BLOW BLOW you know you want to DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT |
|||
| Top | |
|||
| Kilma |
|
|||
|
{USERNAME} wrote: Hey Kilma, what ECU are you running?
Currently its a piggy back job. Hopefully soon I will have a twEECer setup to extract a little more and let it run more healthily (rund quite rich ATM, even for a forced motor).
_________________ The fast fun: Suzuki GSXR1000
|
|||
| Top | |
|||
| Bsjenko |
|
|||
|
{USERNAME} wrote: BLOWN BLOWN BLOWN
build a low compression engine then BLOW BLOW BLOW you know you want to DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT DO IT  Prob wont be a little while untill it is done, but it shall be done.
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| pinkbits8u |
|
|||
|
SO IT SHALL BE WRITTEN SO IT SHALL BE DONE
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
