|
| MrLandau |
|
|||
|
{USERNAME} wrote: Mr Landau
I dont suppose you sell these roller rockers aswell that people are suggesting do you? I would be enclined to go the 4 piece ones if at all, and i was just wondering what sort of time and price is the installation likely to cost. Might as well do it all at once and do the roller rockers as well as these underdrive pulleys if i have to get the chip remapped anyway. Is there any real problem with underdriving the water pump and alternator by these 14 & 22%? I had some 1.72 roller rockers for sale but I ended up selling them at a loss - VPW have the best price on them that I have ever seen( www.vpw.com.au ). Installation of the underdrive pulley set should only take 1/2hr on an EL as you don't have the engine driven fan to contend with. If you have access to a 1/2" drive rattle gun, air compressor and a 15/16" socket - you should be able to do it at home with no problems at all. We checked Barry_V's car when we installed the Ford Racing set on his and found we had full charge by around 1600rpm. The EB/ED 5.0's would be more inclined to have cooling problems with the engine driven fan but the EF/EL's have the computer controlled thermo's which will cool the radiator no matter what rev's you are doing. Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| wild6 |
|
|||
|
do u have underdrive pulleys for au v8 motors that give the same gains as on the ef-el motors
regards from adam
_________________ series3 xr8 5 speed manual, pacemaker extractors, 3' exhaust, lowered cold air intake, k&n filter, interior, 3.9s
|
|||
| Top | |
|||
| Samsy |
|
|||
|
{USERNAME} wrote: There is little to no noticeable effect on accessories if you get the set that includes three pulleys. If you get the crank one, you may notice slightly higher temps or lower voltage outputs but when cruising this won't be a problem - only during idle.
 Samsy - how'd you go with fitting that pulley? Did you need a hand doing it or are you certain you want to sell it. No I didnt end up fitting it! Havent touched the car really since the day I saw u! Been busy with other things. If someone wants to buy it its here!
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| MrLandau |
|
|||
|
{USERNAME} wrote: do u have underdrive pulleys for au v8 motors that give the same gains as on the ef-el motors
regards from adam The AU/Explorer motor uses an intergral harmonic ballancer and crankshaft pulley and the one people who make these units are Ford themselves. I have been onto March and ASP (who make the pulleis Batterns sell) and neither of them are interested in making them. Unfortunately - until one of the mainstream manufacturers starts making them the AU guys will be without this product. Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
{USERNAME} wrote: Mr Landau, do the underdrive kits affect the power steering by much or not at all?
I have one of Shane's underdrive sets on my car and the power steering is fine, still enough assistance at idle, and when you are on the road there is no difference.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| Vic |
|
|||
|
I think that I read somewhere that some underdrive kits can cause the power steering to be a little stiffer at low RPM.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Aaron_EF8 |
|
||
|
[quote=MrLandau]Aaron, the ASP website lists the single underdrive pulley that BPT sells as 25% underdriven on everything. The Ford Racing kit is only 22% on the altenator and 14% on the waterpump - this is using larger than stock alternator and waterpump pullies. The crankshaft pulley you have is much smaller than the Ford Racing set fitted to Barry_V's Love boat DC.
Shane[/quote] Ah ok, I wasn't sure on the size of the FRPP crank pulley. Vic - There isn't a difference in steering effort, having wider tyres, or slightly under-inflated tyres will make a lot more of a difference than the pulley. Regarding the AU harmonic balancer issues, could you bolt an e-series style balancer and pulley onto an AU motor, and use they pullies that way? |
||
| Top | |
||
| XR6boi |
|
||
|
can u get underdrive pulleys for a 4 liter 6? ive got an El xr6 i want to put them on?
|
||
| Top | |
||
| millard455 |
|
|||
|
{USERNAME} wrote: can u get underdrive pulleys for a 4 liter 6? ive got an El xr6 i want to put them on? hell, that has to be the biggest thread mine Ive seen 
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| WARMACHINE |
|
||
|
Tbh it should be made a sticky as theres no real guide for e series V8's, i suppose the search button works but it would be good to have a guide.
|
||
| Top | |
||
| kato |
|
||
|
I installed the BPT 3 piece set a few years ago, I think it's a worthwhile gain with no major side effects apart from low voltage at idle, which cures itself above 1500rpm, the motor revs freer & smoother with the pulleys on...
 Josh
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| harddriver |
|
||
|
do u have pics of how both pullies set look?
|
||
| Top | |
||
| ba_xr6bw |
|
|||
|
I Wana put an underdrive kit on my ba , does any 1 no if there's any side affects for the ba ? And what's a good brand ??
_________________ BANNED USER |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
post it in 6 cyl if its a 6 cyl based question, my advice, talk to CMS. check the sponsors list here.
_________________
|
|||
| Top | |
|||
| Willy |
|
||
|
Hi All,
Does anyone know what the effect is (if any) of an underdrive system when using the airconditioner, let's say, on an EB V8? Since that pulley has not been changed, its drive should not be affected, but has anyone noticed any appreciable increase of operating temp when running the air conditioner? Odd thing: Some people here swear by underdrives, but others say they are not necessary. Will.
_________________ 1994 Black Pearl ED Fairmont V8 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
