|
| Blueprint EA |
|
||
|
CAN IT BE DONE LEGALLY?
I need to talk to someone who A. Has the knowledge on what is required to do it B. Someone who has done the conversion before C. Someone who knows the details about getting it complyed with current regulations I have v8 brake booster K frame 5.0 Ltr Tickford V8 from NF Fairlane Ghia EB Falcon V8 wiring loom Still have to get brake upgrade Exhaust Radiator Suspension upgrade C
_________________ BAG 17 |
||
| Top | |
||
| XR9UTE |
|
||
|
Yep I have a few times actually and legally.
Brakes and radiator are the same. |
||
| Top | |
||
| BuNtEr |
|
||
|
you will need TCM loom TCM andv8 ECU from the other car, as well as the Rac has to be for a V8 the 6 will not do.
front springs need to be from/for a v8 rears dont matter, get a 28 spine diff or you will make scrap out of the 6 diff. and use a new pair of engine mounts. now if you use the K-frame from the NF yo will have to get new NF v8 engine mounts as the EB v8 ones are diffrent. EB FLAT NF ROUND
_________________ BANNED |
||
| Top | |
||
| Blueprint EA |
|
||
|
{USERNAME} wrote: Yep I have a few times actually and legally.
Brakes and radiator are the same. Legally into an EA?
_________________ BAG 17 |
||
| Top | |
||
| Froudey |
|
||
|
i assume 1991 EA cause 1991 the EB V8 was released so i think that would be the loop hole
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Blueprint EA |
|
||
|
hmm if thats the case its a shame cause i have 1990
_________________ BAG 17 |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Yep I have a few times actually and legally. Brakes and radiator are the same. Legally into an EA? Yes and one was an '88 and a coupla '90 models. One had a poxy non-HO 5.0......gutless as hell....he got ripped off by one of these engine importers. |
||
| Top | |
||
| Blueprint EA |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Yep I have a few times actually and legally. Brakes and radiator are the same. Legally into an EA? Yes and one was an '88 and a coupla '90 models. One had a poxy non-HO 5.0......gutless as hell....he got ripped off by one of these engine importers. Geez that sucks big time, but at least now i know it can be done well in WA anyways haha pitty you dont live in Brissy
_________________ BAG 17 |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Yep I have a few times actually and legally. Brakes and radiator are the same. Legally into an EA? Yes and one was an '88 and a coupla '90 models. One had a poxy non-HO 5.0......gutless as hell....he got ripped off by one of these engine importers. Geez that sucks big time, but at least now i know it can be done well in WA anyways haha pitty you dont live in Brissy What are you guy's trying to say you can't rego an EA as a V8 in QLD? |
||
| Top | |
||
| Blueprint EA |
|
||
|
i'm am unsure yes?
I havn't been able to get a deffinate yes or no out of anyone yet
_________________ BAG 17 |
||
| Top | |
||
| eaboomer |
|
|||
|
Id just buy a svo and swap the motor
_________________ Low and slow yeah.... But not that slow but low... But not to low either... yeah |
|||
| Top | |
|||
| SWC |
|
||
|
{USERNAME} wrote: Id just buy a svo and swap the motor s**t mate, look at the posting dates. The last post before yours was 4 years ago. You don't work in the mines do you? |
||
| Top | |
||
| XFWAGON |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Id just buy a svo and swap the motor s**t mate, look at the posting dates. The last post before yours was 4 years ago. You don't work in the mines do you? Think he just came out, someone better tell him it's 2012. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
