|
| 57 |
|
||
|
can any body tell from the engine number what size this engine is
jg23hj 62091c |
||
| Top | |
||
| MrLandau |
|
|||
|
Nope,
all that will tell you is the model of the car it came out of. To tell the differance between a 351 and a 302 you really need to (1.) check the stroke length or (2.) pull the sump and look at the crank. These motors are that old now that that it may have started as a 302 and been retro fitted with the 351 crank and rods or vice versa. Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| ZB351 |
|
||
|
one way ive been told is to take a plug out, get piston down to bottom dead, and insert a length of wire and measure it to the combustion chamber, should be able to tell then
|
||
| Top | |
||
| MrLandau |
|
|||
|
Again, the last cleveland left the factory in 1983 so they are 22+ years old. The heads may have been changed - I have 302 heads on 2 of my 351's. If you put the wire down to the piston - find top dead centre and the rotate it - this will shoot the length of wire up and you can measure the differential of the wire length to determine the stroke. 3.5" = 351.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
thats a 6cyl not a V8
6cyl ends in C V8 ends in K to find out the size of 3.3 or 4.1 take the fuel pump off and you can read it on the crank. |
|||
| Top | |
|||
| NC 5ltr |
|
|||
|
or just tell us what model it came out of
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
just a quick guess, it came out of a gl or falc 500, thats the 23, was built at broadmedows , thats the jg and would be round about a xb,c or d. I know this cause my xd6 was jg23ye, and yes the c confirms it was a 6
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
this is a 6cyl XF that was built in september 1987
JG =aussie made at Broadmedows 23 = falcon sedan HJ = month and year and in this case sept/1987 C at end of number = 6cyl hope this helps you. if its the original engine in the car you can check the engine code on the compliance plate to find out its size. heres a basic list of engines W: 4.1 ALLOYHEAD V: 3.3 ALLOYHEAD B: 3.3. ALLOYHEAD E: 4.1 ALLOYHEAD L: 3.3 ALLOYHEAD (NSW ONLY) N: 4.1 ALLOYHEAD X: 4.1 ALLOYHEAD (NSW ONLY) A: 3.3 IRONHEAD (MEDIUM COMPRESSION) S: 3.3 ALLOYHEAD (MEDIUM COMPRESSION) D: 3.3 IRONHEAD F: 4.1 IRONHEAD Y: 302 2V P: 302 4V K: 351 2V T: 351 4V |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
