|
| stoj79 |
|
||
|
Looking at these on ebay US and it says they fit most but it say=s u need to no the tips sizes that 8 are 393 and 8 are 481.
Question is do my gt40p's have these length valves to suit http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT Thanks in advance Steve
_________________ EL Fairmont - GT steering wheel -3.45 lsd - superlows - white line sway bars - xr kit - au11 xr8 engine - 3500 convertor -BA XR8 leather interior - ltd woodgrain - di filippo extractors - trick flow track heat manifold - tfs1 camshaft - twin 2.5 inch system venom cats hooker mufflers - 187rwk |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: Looking at these on ebay US and it says they fit most but it say=s u need to no the tips sizes that 8 are 393 and 8 are 481. Question is do my gt40p's have these length valves to suit http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT Thanks in advance Steve do you have exhaust valve rotors fitted?then yes-------------mine dont and i used CROW PARTS
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| stoj79 |
|
||
|
What are they
My engines a au3 xr8 engine
_________________ EL Fairmont - GT steering wheel -3.45 lsd - superlows - white line sway bars - xr kit - au11 xr8 engine - 3500 convertor -BA XR8 leather interior - ltd woodgrain - di filippo extractors - trick flow track heat manifold - tfs1 camshaft - twin 2.5 inch system venom cats hooker mufflers - 187rwk |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: What are they My engines a au3 xr8 engine not sure on your spec,check with a manual,spring sizes,loads and valves.valve rotors turn the valves on the exhaust valve-for better or worse on the seat
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| xafalcon |
|
||
|
{USERNAME} wrote: Looking at these on ebay US and it says they fit most but it say=s u need to no the tips sizes that 8 are 393 and 8 are 481. Question is do my gt40p's have these length valves to suit http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT Thanks in advance Steve If your engine is truely an AU3 XR8 220 then they do not have standard GT40P valve tip lengths. Earlier AU XR8's and all non-XR8 V8's did have those valve tip lengths. The AU3 XR8 220's had a very bad combination of springs and retainers. The springs had 4-6mm of slop in the factory retainers. I ended up choosing a Crane retainer and Comp Cams spring.
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |