|
| AXR88U |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Yeh emmision's is a big problem but i think with a standard cam best cat converters probably have more than 2 on the system and a trickflow intake. If your going Aftermarket block then you will have to do the same unless you do other things to get it passed which alot of people do these days  I want my car to be fully engineered the proper way so i dont have any drama's Blocks dont mean anything, and you can use any year block you wish, as it does not affect anything. Emissions will only have to be as good as the engine you were replacing, which is prettty easy with adjusted cam timing, and a lean tune. In QLD all you have to supply the engineer with is a dyno run showing A/F and that will suffice, so you know how to work with that. Possibly register car here, then transfer rego if its too hard in NSW. NSW RTA will not accept Qld engineers reports.
_________________ ________________________________________
|
|||
| Top | |
|||
| ELGT |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Yeh emmision's is a big problem but i think with a standard cam best cat converters probably have more than 2 on the system and a trickflow intake. If your going Aftermarket block then you will have to do the same unless you do other things to get it passed which alot of people do these days I want my car to be fully engineered the proper way so i dont have any drama's Blocks dont mean anything, and you can use any year block you wish, as it does not affect anything. Emissions will only have to be as good as the engine you were replacing, which is prettty easy with adjusted cam timing, and a lean tune. In QLD all you have to supply the engineer with is a dyno run showing A/F and that will suffice, so you know how to work with that. Possibly register car here, then transfer rego if its too hard in NSW. NSW RTA will not accept Qld engineers reports. You wont need one if the car is registered, and its a simple registration transfer.....I used to live in NSW...... |
|||
| Top | |
|||
| AXR88U |
|
|||
|
{USERNAME} wrote: You wont need one if the car is registered, and its a simple registration transfer.....I used to live in NSW...... Good luck telling that to the Blue slip bloke. Even the interstate current rego'd grey imports are required to get a report from a NSW approved signatory now days when transferring rego. I have seen dozens of modified and import cars from interstate that have been required to get a NSW report.
_________________ ________________________________________
|
|||
| Top | |
|||
| AXR88U |
|
|||
|
{USERNAME} wrote: I found this info from Hitman tuning, he is very well known to be a very good tuner and pass cars for emmision.
http://www.hitman.hm/emissions.htm I have worked with this fella before. He gets almost anything through.
_________________ ________________________________________
|
|||
| Top | |
|||
| MICKYYYY |
|
||
|
AXR88U
Give me some feedback on Hitman please and also have you hearedof insight motorsports scott??? He also does emmisions tuning and tunes some big engine cars.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| AXR88U |
|
|||
|
{USERNAME} wrote: AXR88U
Give me some feedback on Hitman please and also have you hearedof insight motorsports scott??? He also does emmisions tuning and tunes some big engine cars. I dont know about the power figures he gets or anything like that. All I know is that out of the cars that I've sent his way (some low comp turbo donks as well), he has never failed to get a car to pass. I have never got any negative feedback about him. But he does know how to charge $$$. As for INSIGHT, the name does ring a bell ( I tried to have a look for some shots of his shop on his website to jog my memory, but there were'nt any) , but I dont remember dealing with him, so I really cant comment.
_________________ ________________________________________
|
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Apparently you cannot get an aftermarket ECU engineered???
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Crap. as long as you have a letter from the manufacterer to say it has been locked then you can get it engineered
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Thats pretty cool but would the tuner send it to the manufacterer and get them to lock the ECU or the tuner can do it???
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
The tuner can do it.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
I doubt the tuner would lock the ecu if u have a tune where its a street/race tune and know emmisions is through the roof and all.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
I am just saying, an aftermarket ECU can be engineered, the tuner has the lock/unlock code, it is assessed, and then the ECU is locked. That is the way you go about getting it engineered. What the RTA is looking for is the fact that it cant be tampered with by the owner AFTER it has passed its emmissions test. My 8860 comes with a letter from the manufacturer to state it is locked and cant be changed by me.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Cool, im going to look more into that.
Thanks for that brett
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 13 guests |
