|
| Savage.Falcon.XT |
|
||
|
hey guys i know iv posted about this before but i have been given another idea,
i have been told to put a single 2 1/2 inch system on my 220kw XR8 through to the rear muffler but when you get to the rear muffler cut the rest of that section off and put a 3 inch hotdog and 3 inch pipe to the end to keep that big 3 inch grunty sound all the while getting the better performance down bottom from the 2 1/2 inch system from the cats back... i found it to be a very interesting idea and the guy that was telling me about it said hes done it to a few before and they get a hell of a big punch down bottom and still sound fantastic... hope to get a few opinions from a few guys on here as everyone knows their stuff and i always get very helpful ideas... cheers guys
_________________ NOTHING BEATS THE SOUND OF A GRUNTY V8!!! |
||
| Top | |
||
| 67RCE |
|
||
|
NO!!! Twin 2.25 or single 3". Single 2.5 is not enough for a 5L!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Millennium_falconXR8 |
|
||
|
Well, you might get a little bit of extra power down low, but you'd be sacrificing a noticable amount of top end power. The low end gain would be bugger all over a properly made twin exhaust.
Besides, twin pipes sound better (a matter of opinion, but I'm right anyway.  )
|
||
| Top | |
||
| Savage.Falcon.XT |
|
||
|
i know it goes against everything that makes sense but iv got 3 guys that have been doing exhausts for 20-25 years telling me 2 1/2, im not a fan of twin on 8's, im more prone to the big a** 3 inch... would love to see any clips of 8's with 2 1/2 and with 3's...
_________________ NOTHING BEATS THE SOUND OF A GRUNTY V8!!! |
||
| Top | |
||
| 67RCE |
|
||
|
http://www.youtube.com/watch?v=MdSBJ1Kr52E
My AU with a single 3". BTW that pass was a 14.3@97mph. UN OPENED!!!!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Ausman |
|
|||
|
dont go a single 2.5 a bloke here had 1 on his ts50 5L and it was a restriction. u could hear the thing struggle high in the rev range. depends a lot on headers and cats as to the sound u will get also, i did send u a pm a while ago about extractors. anyway i'll take this chance to plug my ol girl.
this is a vid of normal driving. it was fairly worked, but resonably quiet at cruise and loud as when opened up http://www.youtube.com/watch?v=2ndB1qFD3s4 same car at skidpan, if u can hear over the noisy s**t ba  http://www.youtube.com/watch?v=it0VKu5q1L4same car at the drags. 13.6 http://www.youtube.com/watch?v=q1wc122g19Q and another xr8 i had with a twin 2.5. do note the sound changed drasticly after putting on extractors and cats, it sounded much beefier http://www.youtube.com/watch?v=hYQlCKua_Zk both cars i had the twin system put on and only found gains everywhere. although both were manuals, i didn't feel any loss of power or torque |
|||
| Top | |
|||
| 67RCE |
|
||
|
Al, I have Cammo's old single 2.5 on my XR8 now, it's definately a restriction!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Ausman |
|
|||
|
there is a single 2.5 on my ute now. it sux and the engine is standard. i've got a twin 2.5 catback here off a ba, but need some cut and welding near the flanges to get them to meet up. ah so much effort lol
|
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
I should measure the systems on my Xr8's, both have been modified from the factory exhaust setup.
I would have thought that anything over 200kw would be needing a 3" all the way thru? Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Savage.Falcon.XT |
|
||
|
well i ended up goin the single 3 inch, god im glad i did... got a great boost in power and the sound is unbeleivable... its a bit loud but hey when it sounds good why not have it loud...
i got a lukey rear section from repco where i work on the weekend which has a hotdog in it, then got the centre section made custom, the guy put a strait throgh in it so im guessing thats why its so loud... may change it later down the track if it doesent settle after a while... will have a clip up soon 
_________________ NOTHING BEATS THE SOUND OF A GRUNTY V8!!! |
||
| Top | |
||
| ToranaGuy |
|
|||
|
Cool. The straight thru will make it fairly loud, but it will settle a tad. I got the exhaust done on the mighty boy last week, only done 150kms so it's not yet settled.
You work @ repco too. Cool. I'm currently working for Recpo, and can't wait to hear the sound file from your Xr8's exhaust. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
