|
| G-LOVE |
|
||
|
my crossflow has very noisy lifters but i've heard that its a common thing in the 4.1's is this true and how long do they last usually? im not sure if these engines are like the L24's or 18rgue's and bang on forever and a day just a little insight would help as this is my first ford
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
noisy lifter? will go for ages. but one day if you get a missfire it may have collapsed. they aren't hard to change though
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| G-LOVE |
|
||
|
how easy is it? can you get it through the side of the block or do you need to remove the head?
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
need a long magnet. if your lucky and they haven't worn excessively and mushroomed over you can pull the rocker cover, rockers and pushrods out and pull them out
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| G-LOVE |
|
||
|
alright cool cheers heaps for that
|
||
| Top | |
||
| Waggen |
|
|||
|
if its alloy head you can pull the rocker cover off and get them out with a magnet or bent coat-hanger.. if it is iron head... the head has to come off
|
|||
| Top | |
|||
| G-LOVE |
|
||
|
awesome!! its alloy so sounds alot easier then it is with the dirty r30 skylines lol
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
Waggen wrote: if its alloy head you can pull the rocker cover off and get them out with a magnet or bent coat-hanger.. if it is iron head... the head has to come off really? thats s**t. i've only ever owned alloy head crossflows
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| cjh |
|
|||
|
The cams are known for being a bit soft from XD to XF. They wore out out pretty quick when people were too lax in servicing.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Waggen |
|
|||
|
they are really particular with the running in of the cam, have to use very good running in lube and oil, and adhere to running in the cam properly
|
|||
| Top | |
|||
| G-LOVE |
|
||
|
bought new lifters and once i got home kinda realised can't be my lifters because compression is fine in all cylinders its more of a tapping/knocking noise but like i said compression is fine but when i rev the engine a bit it starts to splutter any ideas? i was thinking that my rockers might be a tiny bit loose i know its something to do with the 4th cylinder just would like an idea of what it could be before i go replacing everything and ending up with a rebuilt engine
Paul. |
||
| Top | |
||
| G-LOVE |
|
||
|
was my bloody rockers on 1st cylinder loose as a hilton sisters furry bits! was worn that much it was sitting about 4mm lower then the bolt at its tightest which also leads me to believe it happened from lifter problems not getting any oil into it, any idea's where i can get some cheap rockers?
Paul. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
or the cam is gone. lobe worn off
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| G-LOVE |
|
||
|
 hope not! but i guess i'll find out
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
