|
| hellovapano |
|
||
|
Hey guys,
just wondering what a good crow cam would be for my 250 crossflow. Its going to have EF crank, set of 200 rods, ACL flat tops, 20thou shaved head, Wild cat extractors and 2 1/2 inch exhaust. Want something pretty mean but driveable so maybe the high end of the midrange cams. Oh and want a crow cam because i wont need shims Cheers Jay |
||
| Top | |
||
| duckboy01 |
|
||
|
hellovapano wrote: Hey guys, just wondering what a good crow cam would be for my 250 crossflow. Its going to have EF crank, set of 200 rods, ACL flat tops, 20thou shaved head, Wild cat extractors and 2 1/2 inch exhaust. Want something pretty mean but driveable so maybe the high end of the midrange cams. Oh and want a crow cam because i wont need shims Cheers Jay none, use a camtech. They will give you what you want and not just whatever grind they have on the shelf, i wanted something that worked different to the cam i was using and i couldnt even get crow to do a custom grind for me. |
||
| Top | |
||
| coasty |
|
|||
|
We built a motor for a customer and crow sent the wrong push rods. The boss should of measured them but they cracked the sads and got all narky. I'd go with Camtech too.
_________________ Vintage bmx collector. What ya got? |
|||
| Top | |
|||
| eb2fairmont |
|
||
|
Another vote for camtech. Got a CT142 503B-110, not a firebreather but fine for what i wanted.
No fuss with em on the phone, no you need this or that, and were very helpful. Delivery was done to SA within a week. Price is quite reasonable too. |
||
| Top | |
||
| Mark_XDF |
|
|||
|
find yourself an 86DA block from a late model XF ute or panel van, they have E series spec cranks from factory, an EF crank will bolt straight into an 86DA block without machine work. i almost forgot to say, get the dizzy gear from crow, otherwise you'll wipe it out.
_________________ CHEERS MARK |
|||
| Top | |
|||
| gregando |
|
||
|
crow cams are crap they arent centered properly and the lifters run off center to the cam lobes, they wear quick as, go with camtech
|
||
| Top | |
||
| tyler06 |
|
||
|
My crossflow has a crow custom masters cam pushing 350fwhp. No problems with that one and im using another custom grind from them now. Camtech are good but i dont have any probs with crow. Also as said get a 86DA from a 87 on xf. The ef crank bolts straight in. With your combo i would say use a crow 14650. Good for 280- 300fwhp.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
