Fordmods Logo

Ford xe 6 cyl cuts out around 3000 rpm, help???????????????? 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: Ford xe 6 cyl cuts out around 3000 rpm, help????????????????
Posted: Mon Apr 01, 2013 10:59 pm 
Fordmods Newbie
Offline

Posts: 2

Joined: 1st Apr 2013

Ride: ford xe

Location: sydney
NSW, Australia

Hey everybody, new to this forum.
I have a big problem with my ford xe 6 cylinder, my car cuts out around 3000 rpm, it struggles then dies seeing the tacho metre go right down but some times stays on, when around 3000 rpm it starts to hesitate. When it finely dies it has trouble starting.
Ive change: had the carby overhauled, new fuel pump and fuel filter, leads and plugs, new coil, reco dissey and had a mechanic check the timing and he cant find the problem.
It dosent play up in park or neutral if reved, i put the back end on stands so i didnt have to break down testing it around the block and it when pretty high in rpm and hesitated for 1 or 2 sec then tacho metre started to drop like crazy while the car was die, i pumped my foot a few time and the car stayed on. I dont understand, is it the motor? I know the valve seals are leaking. ANY ADVICE OR HAS ANYONE HAD THIS PROBLEM????????????????????????????????
Top
 Profile  
 
 
 Post subject: Re: Ford xe 6 cyl cuts out around 3000 rpm, help????????????????
Posted: Tue Apr 02, 2013 12:18 am 
Smokin em up
Offline

Age: 30

Posts: 201

Joined: 24th Aug 2012

Ride: 1987 telstar/2004 BA XR6 5spd

Location: Newcastle
NSW, Australia

sounds like a fuel issue....try flushing the fuel lines as there might be a blockage some where causing the motor to lean out...i could be wrong though...dose it use excessive amounts of fuel?
Top
 Profile  
 
 
 Post subject: Re: Ford xe 6 cyl cuts out around 3000 rpm, help????????????????
Posted: Wed Apr 03, 2013 9:13 pm 
Fordmods Newbie
Offline

Posts: 2

Joined: 1st Apr 2013

Ride: ford xe

Location: sydney
NSW, Australia

It was using more fuel than usual before it started playing up, ill try flushing them though. can the petroll sender get clogged?
Top
 Profile  
 
 
 Post subject: Re: Ford xe 6 cyl cuts out around 3000 rpm, help????????????????
Posted: Wed Apr 03, 2013 9:27 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3967

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 3:16 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names