|
| PerthStorm |
|
||
|
hi all
I own a 1992 XF Ute, when I turn on the high beams one of the low beams cuts out. Now some people say the lows are meant to cut out when the highs are turned on, but mine have always stayed on. anyone got any ideas as to why it cuts out? |
||
| Top | |
||
| alfy |
|
|||
|
theyre a two stage globe i think. try replacing the globe and see what happens.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| heydonms |
|
||
|
The lows *are* meant to cut out when you put on high beams.
The real question is, why yours ever stayed on in the first place. |
||
| Top | |
||
| PerthStorm |
|
||
|
mine have always stayed on- I posted a message on another site about the lights and it turned into an argument about whether or not they are meant to stay on
|
||
| Top | |
||
| au2man |
|
||
|
Low beams are definately meant to go out when highs are selected.
_________________ what is it with these wankers and their pod filters.....f#*ken too fast too furious crap! You do realise that big suck noise is for your engine and not your member. |
||
| Top | |
||
| heydonms |
|
||
|
If there is any doubt, pull the switch apart, it is relatively simple and you can easily see where the contacts touch for each position.
|
||
| Top | |
||
| alfy |
|
|||
|
au2man wrote: Low beams are definately meant to go out when highs are selected.
are you sure? unless your talking about the two-stage globes in the low beam, where the low beam stage turns off and the high beam stage turns on?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| krisisdog |
|
|||
|
^^^
I hope thats what he's talking about.... |
|||
| Top | |
|||
| ute001 |
|
||
|
On an XF the main Globe is a H4 which is a 60/55 halogen globe and is NOT meant to go out when switched to high beam.....Go to your local Autobarn and ask for a standard H4 replacement bulb.Or be really daring and upgrade to a optic glow set of blue globes....
|
||
| Top | |
||
| au2man |
|
||
|
ute001 wrote: On an XF the main Globe is a H4 which is a 60/55 halogen globe and is NOT meant to go out when switched to high beam.....Go to your local Autobarn and ask for a standard H4 replacement bulb.Or be really daring and upgrade to a optic glow set of blue globes....
Low beam DOES go out when you select high, why would you have a 60 w and a 55w element from the same globeon both sides of the car all lit up at once, plus the other 55w in the driving ligh part of the headlight. Grab a test light and try it on any xd to ed headlight(they all run h4s) Looking at the back of the globe hold the middle terminal at 12 oclock. Now LH terminal is earth, middle is low beam, RH is low beam. Trust me guys i do this for a living.
_________________ what is it with these wankers and their pod filters.....f#*ken too fast too furious crap! You do realise that big suck noise is for your engine and not your member. |
||
| Top | |
||
| MADNC_8 |
|
||
|
replace the H4 globe, one filament is meant to go out and the other light up....
if its going out completely you have a fractured filament in the globe |
||
| Top | |
||
| au2man |
|
||
|
MADNC_8 wrote: replace the H4 globe, one filament is meant to go out and the other light up....
if its going out completely you have a fractured filament in the globe Yep what he said !
_________________ what is it with these wankers and their pod filters.....f#*ken too fast too furious crap! You do realise that big suck noise is for your engine and not your member. |
||
| Top | |
||
| GTBob |
|
|||
|
au2man wrote: MADNC_8 wrote: replace the H4 globe, one filament is meant to go out and the other light up.... if its going out completely you have a fractured filament in the globe Yep what he said ! Yoy have to understand the principles of a 2 filament globe first   
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
